Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Helping Someone get Started

Posts

Helping Someone get Started

#1

Helping Someone get Started

Jake Niedling

>I have been helping a gentlemen with the basics of woodturning a few hours every couple of weeks. He has made some good progress. Everytime we are together though, he mentions another turner friend of his has told him a differnt way to do things. He always tells me that he enjoys my teaching, because I am so patient and he understands better. I have told him that he has to decide which way he wants to do it. I have mentioned that there are many differnt ways to approach woodturning, sharpening and finishing. I try to keep to the fundementals and encourage him to just enjoy the woodturning process. And remind him that there is no replacement for spending time at the lathe.

Anyone else had an experience like this?

Re: Helping Someone get Started

#2

Re: Helping Someone get Started

Doug Thompson near Cleveland

>Not with a new turner but one that has been turning for 20 years. This person called and ask if I could show him how a hat was turned. I said yes and invited him over for the day. Well, the entire day was "wait, your doing it wrong" needless to say it was very anoying. I did turn a very respectable 6 oz. hat the "wrong way". His style of turning was straight from a Ellsworth video which is great for turning a bowl but not a hat.

Bottom line is everyone has there own style that works for them. Show them how you make a cut then leave it up to them. There is no right or wrong.

Re: Helping Someone get Started

#3

Re: Helping Someone get Started

Curt Fuller

>I've never tried to teach anyone how to turn but this next week I'm going to demo at our club for the first time and I'm scared to death. I turned for about 3 years without any actual firsthand help. Then I joined the club and I see everyone doing many things very differently than I do them. It makes me wonder what they'll think when they watch me demo turning a goblet.

Re: Helping Someone get Started

#4

Re: Helping Someone get Started

RevDoug

>I'm gonna bet they are very impressed. Go for it! 8)

Turn 'em round,

Re: Helping Someone get Started

#5

Re: Helping Someone get Started

Bill Grumbine (Kutztown PA)

>Curt, in a lot of crowds there is often the person who needs to show you and the rest of the audience how much they know, and a lot of times it will take the form of a question combined with "so and so does it differently". Sometimes the questioner is genuinely confused or seeking information. I always respond that they are probably right, but that I am here to show them how I do it, and move on. It is never profitable to try and discuss another person's turning technique during a demonstration of your own. You are there because they want to see how you do it, not someone else. Someone else can come and demo next time.

I suspect that your club will treat you well though, being that you are a first timer. At least, I hope so, and good luck with your demo!

Bill

Re: Helping Someone get Started

#6

Re: Helping Someone get Started

Doug Thompson near Cleveland

>Kurt, IMHO don't worry what others think. You are showing your club how YOU turn a goblet. Tell the members that this is your first demo and slow down a little.

After the demo is over you can reflect on what went well and what didn't.

Have fun,

Doug

Re: Helping Someone get Started

#7

Re: Helping Someone get Started

john lucas

>Doug has given the advice I give all my students about Job interviews. After it's over write down everything you wish you had done (or did wrong). You will forget much of it if you don't. If you want to improve your demos write down what you forgot to include or how you think you could teach it differently. Then ask some of your friends how they think you could improve the demo. Write this down. You will be amazed how fast you improve.

Re: Helping Someone get Started

#8

Re: Helping Someone get Started

Doug Thompson near Cleveland

>Kurt, to answer your orginal question;

"It makes me wonder what they'll think when they watch me demo turning a goblet."

Glad it's you doing the demo and not them

Jake, sorry to hijack your post.

Re: Helping Someone get Started

#9

Re: Helping Someone get Started

Phil Joines Krum, Texas

>Sure, there are usually a bunch of ways to turn something. In a one on one situation I try to discuss various methods to accomplish the same ends. There usually isn�t time to do that during a demo.

The more styles you are exposed to the better you can get. I've run into a few people who will try to do things exactly the way some "expert" does and won't consider any thing different. Usually it's because they lack confidence in themselves and don't realize it's impossible to teach all the subtle nuances, a lot of which are subscious adaptations to how the material is reacting.

Keeping an open mind is the only way to learn anything.

Re: Helping Someone get Started

#10

Re: Helping Someone get Started

Bill Hale / The Wood Spinner

>One of the first thingsI do is to tell the person you are working with that there are many ways od doing things. Tell them that what you show them is your way. I believe if someone came to me and told me my way was wrong I would have to tell them that they must know more than I do and they dont need to stay any longer.

I do have kind of a short fuse. I am tollerant but only to a point.

I consider myself a good teacher and have been told so many times.

Bill in Dolores, CO.