Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

"T" Diamond Wheel dresser

Posts

"T" Diamond Wheel dresser

#1

"T" Diamond Wheel dresser

W.C. Turner

>I have the wolverine single point diamond dressing jig,but, it requires some set up time. I just got one of these "T's", cause I thought it would be faster to use. After, set up adjustment, the wolverine does a good job, & only removes minimal grit though.

Those of you that have this type of dresser, how do you manage to get a smooth cut on the wheels, & not make a dip in the wheel, & not remove more grit than necessary?

Re: "T" Diamond Wheel dresser

#2

Re: "T" Diamond Wheel dresser

Russell L. Babbitt Jr.

>I also have both the Wolverine dresser and a T dresser. Use the T dresser with a light touch back and forth across the full face of the wheel. I use is quite often while sharpening to remove the steel that builds up. Every month or so depending on how much I turn I use the Wolverine dresser to keep the wheels round and in balance if needed.

Re: "T" Diamond Wheel dresser

#3

Re: "T" Diamond Wheel dresser

Barry Turner

>I've got both, and I agree with you, the Wolverine is too much trouble to set up to use very often. I use the Woodcraft T-Dresser often to remove the metallic build up on the grinding wheels.

Really, I think the Woverine should be used to "true" the wheels initially after installing or after removing and reinstalling a wheel, but the T-Dresser is the appropriate tool to use to remove the glaze. I don't really think the Wolverine is meant to be used to remove the glaze.

Re: "T" Diamond Wheel dresser

#4

Wheel Dressing Tip...

Peter Teubel

>Before you put diamond to wheel to clean out the black buildup (metal particles), try compressed air. Use a small nozzle with at least 100psi. It will remove of 90% of the black deposits.

Re: "T" Diamond Wheel dresser

#5

Re: Wheel Dressing Tip...

W.C. Turner

>Thanks for relpies thus far.

I'll try the air.

Email: Remove 2

Re: "T" Diamond Wheel dresser

#6

Re: Wheel Dressing Tip...

Bob Fawcett

>I bought a Norton SG wheel recently. This is an expensive wheel. It runs true and cuts great. Even though it has some color on the surface, I can't tell any difference in the way it cuts.

I suspect that wheels are like tools. After a while, you can tell when they are dull and need sharpening. Right now I think this wheel is still cutting well. I will clean the color off soon, and see if it is different. If it is, I will clean it frequently, if not, it may stay colored.

The point of all this is that it may depend on the wheel. It may not. Maybe color is a an indication, maybe you just need to know your system.

Maybe I should just shut up and think all this to myself. You guys may already know this.

Re: "T" Diamond Wheel dresser

#7

lol @Bob

TDaniel

>I am laughing with you Bob. My favorite saying is: "If it ain't broke, don't fix it". I agree with you, if the wheel is still grinding then keep using it. Thanks for the laugh.

TD

Re: "T" Diamond Wheel dresser

#8

Re: lol @Bob

Bob Fawcett

>I love that saying TD.

I sure wish I could that across at work.

Shut up Bob, you talk too much.

Re: "T" Diamond Wheel dresser

#9

What I do

jim reed @ tallahassee

>I grind alot and wear my wheels down to nubbins. The T diamond dressers are the best and I have worn several out. As said before, rest the bottom on your grinder rest and move it back and forth. Touch up the wheel frequently and you will be rewarded with quick and accurate grinding.

Re: "T" Diamond Wheel dresser

#10

Re: Wheel Dressing Tip...

W.C. Turner

>Hey, that air really does work.

It should save wheels, & Diamonds!

Thanks for the tip!