Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

dust collecter

Posts

dust collecter

#1

dust collecter

Bill Crommett

>I have a problem> I have a 2 hp Grizzley sawdust collecter that keeps blowing the bags off. There is a good and a bad side to this problem, because the unit is stored outside in my paint locker, so I don't have daily monitoring. But when it blows a bag it isn't in my workshop to mess everything up.

Last week when I found a big mess in the paint locker, I removed both bags, put the upper bag through the washing machine (LOML wasn't home) to clean out the pores,cleaned off the rims with lacquer thinner and put the bags back on with duct tape additional securing.

Today the top bag had blown off. I have to assume that the main problem is that I converted the whole system to an 8" PVC system with a new 8" intake plate instead of the two 4" nozzles.

The system sucks like a jet engine intake, so I would like some opinions as to how to keep the bags from blowing. My paint locker looks worse than my shop in it's worst day.

Re: dust collecter

#2

Re: dust collecter

Allen Neighbors

>Bill, I don't have a system, but here's what I think: Converting two 4" tubes to one 8" tube is not equalizing... it's increasing, the previous volume. One 8" circle will hold 2 4" circles, plus the extra space in the circumference... meaning there will be a lot more volume in the 8" tube. Your system isn't designed for that much volume, and that horse motor is having a heyday. :o)

That's why (I think) you keep blowing bags off. I say "I think", because I haven't studied hydraulics since I graduated the Fire Academy in 1979.

Maybe someone else will chime in here and help you out with a solution to this problem.

Clean the paint locker a little at a time, my friend. Don't overdo it. :o)

Allen

Re: dust collecter

#3

Re: dust collecter

Bill Hale / The Wood Spinner

>Depending on where you live and if you need to return the shop air to the shop consider venting directly to the outside with no bags.

I have a small, tiny storage building outside my shop and it contains the blower and my compressor. The building is sound insulated and the blower vents outside. I have a length of flex pipe outside and it acts like a muffler. Noise level in the shop is very low and outside not bad. I even clean the floor and all with the vacuum.

Good turning and be safe

Bill in Dolores, CO.

Re: dust collecter

#4

Re: dust collecter

Steve in NC

>Bill

I had similar problems with the stock bags that came with my 2hp Woodtek. I traced the problem to the bag AND band sliding up over the rim. Therefore I concluded I needed more friction between the bag and rim. I did the following at various times.

Put on 1 micron bags, Made a big difference due to increased air flow.

Added a couple of turns of duct tape on the rim where the bags connect. Added a bit of friction.

I upgraded to metal, spring loaded band clamps. Then increased the tension as much as possible.

These things solved my problem. If they do not work, I expect that you could bend out the rim a bit to keep the band from sliding up.

Hope this helps. (the increased air flow is a good thing.)

Steve

Re: dust collecter

#5

I don't understand

Bob Fawcett

>I have a cheap HF dust collector. Its claimed to be 2 HP, but is on a 15amp 120 circuit.

The bands that hold the bags on are above a raised bead. Assuming the clamps cannot expand, the bag could not pass the bead if it wanted to. The bands a spring loaded steel.

Is the Griz not built like this??

Re: dust collecter

#6

Re: I don't understand

john lucas

>My very old Powermatic dust collector that was made in Taiwan used to blow the bottom bag off occasionally. Filled the whole room with dust when it happened. It has a smooth straight sided area that the band clamp attached to. There were pins to hold the bags but the holes in the bags tore after one or two emptyings so they didn't help hold it.

The bags on my new jet are really pretty hard to get off I haven't had a hint of problems with them. They have a flexible band sewn into the bag and you just sort of pop it in place on the inside of the tube. Don't know why they are always so hard to get out when they pop in so easily.

Re: dust collecter

#7

Re: I don't understand

Jim Underwood

>It would seem to make sense for DC manufacturers to make this "joint" foolproof, but they don't.

If you put a 90 degree flange on the rim of the DC so that the band and bag won't blow off in a huge mushroom cloud of toxic sawdust, then it makes it all but impossible to get the dang thing back on when changing the bag.

If you just put a "bump" flange on the rim then it's easier to get the bag on, but the silly thing blows off all the time.

And a "pin" to hold it on sounds like somebody didn't think that through doesn't it? I'm surprised about that one.

I wonder if you could fabricate something to solve all these problems in one fell swoop...

I made a joint for our main DC at work where the exhaust pipe runs into the dumpster last year. I got a 10" ring (for hooking spiral pipe together), had two 1/2 pins welded to them for "locator pins" Then made up a large square plate with a 10" hole in the middle. I bolted three toggle clamps evenly around the hole on this plate, and drilled two 1/2 inch holes in it to receive the locator pins, then bolted the whole plate to the dumpster, after cutting a 10" hole in it. Then a short section of spiral pipe was placed in the 10" ring and "flanged". I cut a thick gasket from some floor mats to go between the plate/toggle assembly and pipe/flange assembly. After hooking up the flex hose to the pipe/flage assembly I then placed the locator pins into the holes for them in the square plate and clamped the whole thing together with the toggle clamps.

That stopped the dust cloud around the back of the shop. It also kept the air compressors from getting clogged up too.

Don't know why the DC manufacturers don't do something like this to prevent the freakin leaks...

Re: dust collecter

#8

Re: I don't understand

Bill Crommett

>Thanks, fellows, It seems like each of us has to use his own ingenuity to solve lifes little problems.

Just running the exaust outside is a solution that I have occasionally used---- but only by accident when the bottom bag blew.

Allen: Aside from the hydraulics, I recall the formula of PI X R squared should give the total area differenc, and thus a semblance of of volume resistence.

Re: dust collecter

#9

Re: dust collecter

Pete in Holland, MI

>I have a 10 year old 2hp Grizzley collector with the stock bags. The clamp for the bags is a glorified hose clamp. Have had a pre-filter (modified garbage can lid attachment and a 33 gallon can) in the system since day 1. I do a fair amount of wood working for a hobby guy. The pre-filter can gets emptied 20-30 times per year. The bags only once per year. It usually only carries the "fines" from sanding. Learned early on that the pre-filter, once it reaches about half full, starts to allow chips to enter the bags. Cut a 1" wide slit in the side of the can to allow installation of a piece of Lexan as a sight glass to allow me to monitor the can. Part of the filtering process in a bag filter is to allow some dust to cake on the bags. This is kept at bay each time the system is shut down and some material is shed as the bag collapses.

I didn't gather this from your message, but suggest you don't let your bags get too full, as with the lower bag full, you've lost 50% of your air disipation area.

Also, do you do any "damp" or resinous wood work that may tend to plug the fabric of your bags?

Hope this helps........

Pete