Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Is it dry yet?

Posts

Is it dry yet?

#1

Is it dry yet?

Jerry Ingraham

>Being relatively new to turning and without a moisture meter, how do I tell if a blank is dry enough to turn to completion? Some blanks seem dry and maybe that's all there is to it. Any sage advice? Thanks.

Jerry

Re: Is it dry yet?

#2

Re: Is it dry yet?

Rick Allen

>If you Kiss the blank

Dryness becomes apparent

Cool no and warm yes

Re: Is it dry yet?

#3

Re: Is it dry yet?

Jim

>You can weigh it periodically, recording the weight as you go. When it stops losing weight for a week or two, it's reached equilibrium moisture content for the area.

Or you can just wait 6 mos to a year if you've roughed out the blank to 1 inch thick per 10 in diameter. (I think that's right.)

Usually a green log dries one inch per year in its uncut form. So if you've roughed out a 1 inch thick bowl blank it should be dry after 1 year.

Several people speed up drying by using a microwave, or alcohol soaks. I've not tried either one, so can't vouch for either method.

Re: Is it dry yet?

#4

Re: Is it dry yet?

Bill Crommett

>Keep on weighing until the wood stops losing weight.

Re: Is it dry yet?

#5

Re: Is it dry yet?

David Breth

>And by the way, I've found the self-service thing at the post office to be an excellent scale. And the price is just right.

David B.

Re: Is it dry yet?

#6

Re: Is it dry yet?

John Lucas

>I use both methods. You can feel when a blank is dry. It will feel warm to the touch. Large blanks I weight and then check them periodically and record the weight. When they stop losing weight they are dry. Just a ball park,my large bowls that are 16" and probably 1 1/2" thick will dry in 6 months or less here in Tennessee. Smaller bowls 12" that I leave around 1" thick will dry in about 3 months. I don't worry about it anymore, I rough more than I turn so there's always about 10 to 15 laying on the shelf, most are much over 6 months old so I know they are all dry. Now that I have a little more space than my old shop I'm going to try to set up some drying shelves. Freshly turned go on the bottom and I will move them up as time goes by. That way whatever is on the top shelf will be dry enough to use.

Re: Is it dry yet?

#7

Re: Is it dry yet?

Lan Brady

>Jerry,

I would like to give you a response, but I cannot get the thought of Rick kissing bowls out of my head long enough to write a readable response. I hope he does this late a night so that no one sees him.

Rick,

Thanks for making my day a little nicer. Of course, everyone around me now knows that I was not working on company stuff. No problem though, I will gladly work late tonight and enjoy it.

Good luck to all, Lan

Re: Is it dry yet?

#8

Re: If it doesn't sling juice ....

JamieDonaldson

>... while spinning then its dry enough to turn for most purposes. But don't try to glue up any damp wood!

Re: Is it dry yet?

#9

Re: Is it dry yet?

Stephen Mushinski

>I will use my nose to check moisture content in wood. Works very well and if you practice you can even tell about what percentage. For those that think I am kidding, I am not. Put a wet board under your nose and then try a dry board you will sense the difference. Wet will be cold dry will be warm. I say to use your nose as it if much more sensitive then your hands. I have not tried kissing the wood but I am sure it would work very well also. - Steve