Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Thank you, Al Crandall....!!!

Posts

Thank you, Al Crandall....!!!

#1

Thank you, Al Crandall....!!!

Allen Neighbors

>Folks, sometimes I'm so one-track, or see something so much differently than other people, that its hard for me to explain to someone else what's on my mind.

I've been thinking all along that what I needed for my Nova2s to fit a Oneway Spindle, was something along the style of a "Spindle Adapter", rather than a "threaded bushing". I wanted to know the size of the internal threads of the SN2 so I could order the right adapter ... they don't even make anything like what I had envisioned in my steel trap mind.

I want to thank Al Crandall for his patience, and the time he spent with me, figuring all this out for me. He explained things so patiently, and in such detail, that even I could understand it. :o)

He made me understand that what I needed was, indeed, a threaded bushing, and he explained that the reason there wasn't an adapter already made to fit the Oneway Spindle was because size of the internal threads on the chuck are too close to the Oneway's to bush it out, and that all I needed was to get a Spindle Adapter, to reduce the Oneway Spindle to fit the SN2s.

But, I also didn't want to just order a Spindle adapter that would reduce the Spindle to 1", because I thought 1" was too small for the size of the blanks I expected to mount.

So... my friend Al advised me to order two inserts for the chucks that would fit a 1 1/4" inch Spindle, and then to order a Spindle Adapter that would fit the 1 1/4" chuck inserts. That way, I'm only reducing the Oneway Spindle by less than 1/64 of an inch... So, to shorten an already too long story: I made those orders this morning.

I also ordered my new Oneway 1640!! Six to eight weeks of waiting, now.

Thanks again, Al.

Allen

Re: Thank you, Al Crandall....!!!

#2

Congrats Allen

Bob Fawcett

>Congrats on the new OneWay. I am sure you will love it.

I know the agony you went through making the decision. I did the same thing a few weeks ago.

Re: Thank you, Al Crandall....!!!

#3

Re: Thank you, Al Crandall....!!!

Gil Jones on Lake Seminole GA.

>Good luck with your new lathe, Allen, you chose a fine one.

Re: Thank you, Al Crandall....!!!

#4

Re: Thank you, Al Crandall....!!!

Carole Valentine

>Let me get this straight - you have an adapter in the chuck and then you put an adapter on the Oneway spindle that will fit the adapter you just put in the chuck? Seems to me that the opportunity for the thing running out-of-true would be greatly increased under these conditions. But then what do I know! LOL Let us know how it works.

Re: Thank you, Al Crandall....!!!

#5

Congrats Allen

Roger Smith

>I am sure you will be happy with that lathe.

roger

Re: Thank you, Al Crandall....!!!

#6

Re: Thank you, Al Crandall....!!!

Curtis TX

>Great news on the lathe. I really want a 1640 bad. I can't wait to hear all about it.

Curtis

Re: Thank you, Al Crandall....!!!

#7

Re: Thank you, Al Crandall....!!!

Mac

>Good for you Allen, you wont regret it......lots of fun to come yet!

Re: Thank you, Al Crandall....!!!

#8

Re: Thank you, Al Crandall....!!!

Allen Neighbors

>Carole, the chuck has threads that so closely match the threads of the spindle, that they can't make one that thin. The only alternative to a Spindle adapter plus an insert for the chuck is for me to purchase two new chucks. This is the cheapest way out. If I get some bad runout, I'll do that, but 200 bucks is better than 450.

:o)

Allen

Re: Thank you, Al Crandall....!!!

#9

Re: Curtis, where are you

Allen Neighbors

>located in Texas? I'm in the SE corner of the panhandle, right at the SW corner of Oklahoma.

Allen

Re: Thank you, Al Crandall....!!!

#10

And $450 is better than $600 ;))

Carole Valentine

>Hope it works for you, Allen. How long before you get that pretty new white machine? You gonna keep the old one?

Re: Thank you, Al Crandall....!!!

#11

Re: Thank you, Al Crandall....!!!

Bob Herrman

>Good choice on the Oneway 1640. I ordered one at the end of March from Highland Hardware and still am waiting. Seven Weeks and counting. Hope it comes soon as I have sold my old one.

Re: Thank you, Al Crandall....!!!

#12

Re: Old Griz will remain...

Allen Neighbors

>in place. Just sold my Tablesaw/Incra TSIII/Router system to make room for the 1640. They first told me about 6 weeks, then when I placed the order, Kim told me 8 - 10 weeks. Still gotta wire in my pedestal for 220, and some other things. So, I'll take my time... and pull my hair out!!!! ... while waiting. :o)

Allen

Re: Thank you, Al Crandall....!!!

#13

Re: Run-out

Bill Crommett

>A little run-out will make no difference as long as you don't remove the work piece from the chuck and try to put it back on again.

Re: Thank you, Al Crandall....!!!

#14

Re: Run-out

Allen Neighbors

>Thanks, Mr. C., I've noticed that on Old Griz. If I have to take a piece out of the chuck, I mark the bottom with the number of one of the jaws, so I can remount it. That works, somewhat.

Thanks again,

Allen

Only been waitin' one day for the new one, and Old Griz is giving me fits!