Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Lights

Posts

Lights

#1

Lights

woodnut358

>Does anyone have,and would anyone recomend this lighting system for their lathe? Thanks.

http://www.turningwood.com/light_stand.htm

Re: Lights

#2

Re: Lights

Norm Smith in Nova Scotia

>Hi Woodnut.

I have one without the extension arm. It is great. Dont bother buying the magnet as it is a waste of money. I epoxied a wooden disk on the head od my Powermatic lathe and screwed on the adaptor for the fixtur.

No problems.I bought mine at Craft Supply for $54.99.

Norm

Re: Lights

#3

JL

Re: Lights

JL

>I won't have a picture for a while (mainly because I won't be installing the suspended ceiling for a couple of weeks or more), but have you considered track lights? When I bought the suspended ceiling lights and grids (thank goodness for 10% off certificates, even if I do have to store the stuff for a while), I "splurged" and got track lights for over the lathe and over the work bench. I figured that if it was overhead and there were several of them, that should work. Just a thought..

Re: Lights

#4

Re: Lights

Barry Irby

>I use a little high intensity low voltage light form K-mart. About $12 I think. It just clips on and has a flexible arm. The bulb finally blew after about two years and I went back to get a replacement. They did not have one, but the guy in the store gave me the bulb out of the the light on display.

I am one the look out for a dentist light. Keeping my eyes open for one cheap. From someplace where they remodel dentist's offices maybe.

I also have a fluorescent fixture above and parallel to the bed of the lathe on the ceiling for general lighting.

Re: Lights

#5

Re: Lights

John Lucas

>I have 3 of his lights and one of the stands. I absolutely love those lights and the light support system is one of the most useful things I've ever bought. I had him install an extra arm for the dust collector. That was well worth the money.

Re: Lights

#6

Re: Lights

John Lucas

>Gosh Norm I love the magnet base. It lets me move the light very easily from lathe to lathe or from headstock to tailstock to the bed, whatever. I still have one on the bracket that I move around but having a second light in just the right postion really helps sometimes. I also move it to the bandsaw when needed and occasionally to the workbench for better light when I'm carving. I have several of the quick releas adaptors as well as 2 magnet bases. These lights are really handy.

Re: Lights

#7

Re: Lights

Jim Shaver Oakville, Ont.

>Hi,

I saw Moffatt lights for the first time a few weeks ago while taking a class at Marc Adams. They had these lights set up on shop machines like the bandsaw etc. I was so impressed with them. I found one at the Local Woodcraft in Indianapolis and I bought it for my bandsaw as well.

I realy liked the feel of the light in moving it around, the solid feel of the make and the over all quality as well.

I too looked at these lights for a lathe, I may see how it goes with the band saw before I buy one for the lathe, but since I do not use a dedicated light for my lathe I might use teh one I bought till I get tired of moving it back and forth and just buy a second one.

The set up on that link looks pretty good to me.

Take care,

Jim

Re: Lights

#8

Re: Lights

Mark Mandell - Gone Round In Jersey

>I have two that are mounted to the joists above and to either side of my lathe. I use 50watt Halogens in each. Gary and Steve are good guys to deal with.

M

Re: Lights

#9

Absolutely...

Peter Teubel

>I have two of his stands each with 2 Moffet lights for my lathes. Excellent product. Very handy and excellent quality. I highly recommend these.

Re: Lights

#10

Re: Lights

robo hippy

>I have 2 of the moffit lights on my lathe, one on the headstock, and one on the banjo. Get the rough duty bulbs for the lamps. I don't like the halogen because of the heat.

robo hippy

Re: Lights

#11

Re: Lights

W.C. Turner

>I bought the new, heavy duty light system with 2 moffatts, from Gary, last November. It includes 4 electrical plugins, and heavier tubing, and my model is made specifically to use on my PM 3520A. He has other models for different brands of lathes. Good system, keeps your light handy, easily moved out of the way. I use the 60 watt halogens.

I also installed one of the 300 watt halogen workshop lights over my lathe. It uses two 150 watt bulbs, that, to my surprise, came included with the light. Rockler, & places like that have them for about $35, plus about $8 shipping. Although, I purchased mine from a Rural King store, on sale for $20, reg. price about $23.

I also have six, 8' flourescents, mounted on the ceiling for general shop lighting.

You'll like doing business with Gary Sanders. I've never dealt with anyone like him before, on or off the internet. Gary didn't know me from Adam, yet, he took my order & shipped it to me, & didn't ask for a penny. He included an invoice inside the box, and said to send him a check when I received my lighting system. Now, how is that for a trusting soul, in this day, and time ?!

Re: Lights

#12

Re: Absolutely... Me Too!

Barbara Gill, Remlik VA

>

Re: Lights

#13

Re: Lights

Norm Smith in Nova Scotia

>Hi John. I had the light mounted on my lathe with the magnetic adapter. I knocked it off a few times so I epoxied a stand on my headstock.

Norm

Re: Lights

#14

150 watt bulbs

tek-Brunswick, Ohio

>Have you found a place that has good prices on the 150 watt halogen replacement bulbs? I can get them at the orange box, but if I remember right they are over $5 each.

Re: Lights

#15

Re: Lights

Clay Foster

>I've had one on my lathe for several years. I'd give up the lathe before I'd give up the light.

Re: Lights

#16

Re: 150 watt bulbs

W.C. Turner

>I haven't had the need to seek out replacement bulbs yet. I had made up my mind not to purchase the light if the bulbs hadn't been included. But, now, I'm like Clay, I do like the hanging light a lot.

Re: Lights

#17

Re: Lights

woodnut358

>Thanks for the replies.