Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Supernova2 Chuck

Posts

Supernova2 Chuck

#1

Supernova2 Chuck

Allen Neighbors

>I have tried to find out from Teknatool what the original threads are inside a Supernova2 Chuck. If I can determine what size those threads are, I will know which adapter to order when I order the Oneway 1640. I have two chucks, so I don't want to have to sell them, and buy new ones threaded to fit the M33 X 3.5 Spindle.

Can anyone tell me the thread size of the standard Supernova2 Chuck?Thanks,

Allen

Re: Supernova2 Chuck

#2

Leo Van Der Loo

Re: Supernova2 Chuck

Leo Van Der Loo

>Hi Allen

No I don't have the answer but I bet the boys at Oneway have the answer to that.

Have fun and take care

Leo Van Der Loo

Re: Supernova2 Chuck

#3

Re: Supernova2 Chuck *LINK*

Carole Valentine

>Allen, I don't think there is an insert. Unfortunately, I think the ones that fit the Oneway are direct threaded. I may be wrong. Check out the link below (it's a pdf file)


Teknatool

Re: Supernova2 Chuck

#4

Re: Supernova2 Chuck

Allen Neighbors

>Thanks, Carole. Thanks for the PDF file, I've saved it. I understand that the Supernova2 Chucks are direct threaded to fit the Oneway. But what I'm trying to find out is the size of the threads inside the SN2... their "before insert" standard size.

As informative as all the Teknatool material is, none of them will tell that thread size.

Thanks for trying, young'un.

BTW, those pieces you posted up above, are awesome! Gives me hope for my Camphor and Cherry!!

Allen

Re: Supernova2 Chuck

#5

Re: Supernova2 Chuck

Greg Jensen

>The thread size is an odd size. Not standard. I believe it is m38. No spindle is threaded to that size. It is only used to accept there inserts. You must have an insert

Greg Jensen

Re: Supernova2 Chuck

#6

Re: Supernova2 Chuck Questions

Allen Neighbors

>Gregg, thanks for posting this info. But you make me ask more questions. BTW, I surely enjoyed your demos at the Georgia Gathering. Thanks for taking the time to help us out.

Supernova2 doesn't have an insert for the Oneway, M33X3.5 Spindle thread. They have to be threaded to fit.

Does that mean that I now have two Chucks that can only be used on my old Grizzly? Do I have to, or can I have, these Chucks re-threaded? Or do I just have to buy two more chucks?

Re: Supernova2 Chuck

#7

Re: $63.99 at BestWoodTools will solve the problem

Al Crandall (NE of Indy)

>I recommend you buy a spindle adapter for your old chucks to fit on the new lathe's spindle. Check out the adapters at:

http://www.store.yahoo.com/bestwoodtools/precspinad.html

I keep one of BWT's 1 1/4" to 1" adapters on my 24" PM about 95% of the time so I can use my old 1" tooling which fits smaller turnings just fine. If the log gets up in the 18" to 20" range I remove the adapter and go to the tooling with the 1 1/4" threads. I haven't noticed any downside to having the adapter on the lathe.

Re: Supernova2 Chuck

#8

Re: $63.99 at BestWoodTools will solve the problem

Allen Neighbors

>Al, thanks for posting, but this will not solve the problem, until I know the inside threads of the SN2 Chuck. Teknatool says the chuck body has to be threaded with the M33 - 3.5 threads to fit on the Oneway Spindle.

I have two Chucks. I don't want to order more. I can't get an Adapter until I know the exact thread size of the Chuck sans Adapter. I know that whatever size adapter I get will be a little smaller than the Oneway Spindle, but it won't be as small as the 1" that I have now.

I can't even measure the outside of my own adapters, because I don't know how, and shake to bad to take the chance on getting a wrong reading. I don't know why Teknatool wants to keep all this a secret....

Thanks anyway, I do appreciate your trying. :o)

Allen

Re: Supernova2 Chuck

#9

Re: Check your email.

Al Crandall (NE of Indy)

>

Re: Supernova2 Chuck

#10

Re: $63.99 at BestWoodTools will solve the problem

Bill Crommett

>Allen: Go to your favorite auto parts store and buy a thread gauge. If they don't have one, go to Sears. Internal threads are a little harder to measure than external, but you CAN do it.

Bill

Re: Supernova2 Chuck

#11

Re: $63.99 at BestWoodTools will solve the problem

Phil Joines Krum, Texas

>Just measure the outside of your existing adapter.