Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Spring fling turning day.

Posts

Spring fling turning day.

#1

Spring fling turning day.

john lucas

>Wow, we had 22 people stop by to play. At one time we had 7 lathes running and 18 people either turning or sharpening. I definitely need to find more grinders if we are going to have this large of a group. Sorry I didn't get more photos. I was too busy answering questions and finding chucks, rulers, pencils, chisels etc. Not to mention trying to explain all the jigs I have laying all over the shop. Fun day, and we were able to really help some of the new turners. There's no telling how many tools we sharpened. We really need to spend more time teaching sharpening with hands on demo's. They brought some of the most poorly ground tools to work with. If you all aren't doing hands on sharpening demo's it should probably be done some way or another. I've done a sharpening demo for both clubs but they really need the hands on with an instructor standing by to help.


img

Re: Spring fling turning day.

#2

Another photo 

john lucas

>


img

Re: Spring fling turning day.

#3

temporary carving bench.

john lucas

>This is my temporary carving bench until I have time to build somethng really nice. I set up a bunch of different carving an woodburning stations but only one person was really interested. I was hoping my retired dentist friend would make it. I put up my antique dental grinder just for George but he didn't make it.


img

Re: Spring fling turning day.

#4

Re: temporary carving bench.

Jennifer@Indy.USA

>Great pics John....looks like you all had a great time...how could you not!

Nice to see someone else using a sample burning board too :)

Your carving/burning bench looks great. I MUST do something about mine.

Jen

Re: Spring fling turning day.

#5

Re: temporary carving bench.

john lucas

>Jennifer. I have a lot to do on it but at least it's a start. I want to rig up some strap sort of clamps to hold odd shaped pieces. I'm also thinking about building a tilting table top section similar to the Lee Valley carving table. I would like to make it height adjustable some way so I can work standing or sitting.

I'm a firm believer in test boards. Not just for woodburning but everything. I do test boards for analine dyes, paints, finishes. I don't have enough time to screw up projects by trying untested techniqes and finishes. If I do want to try something new I'll try to keep a scrap of the same wood handy so I can test a finish or dye or whatever on the scrap piece before putting it on the final piece. I hate having to redo a piece because of incompatible techniques.

One reason I play with the test boards for woodburning is that there are so many possibilities. When I first saw woodburning on turning all I was was people burning the hell out of the wood. You can use a burner to create everything from dents in the wood, to slight tan shading to really charred wood. There's so much you can do that we as turners don't do. Look at some of the pyrography websites and it willl really open your eyes.

Re: Spring fling turning day.

#6

Re: temporary carving bench.

Chris K in MD

>It looks like you all had a great time John! I really like your "enhancement" table while you think you started its way further along then my "started" one. I too would like to have the features you mentioned but was considering a tall bar stool in staed of having the table move up and down to stand or sit.

Re: Spring fling turning day.

#7

Re: Spring fling turning day.

Larry In Lima

>Looks like this was a lot of fun. Wish you were closer, I'd have been there. I'm in NW Ohio though, and there isn't much going on around here in Kornfield Kounty. I definitely need guidance in the sharpening dept., but sooner or later, I suppose I'll get better, or something around here will happen. Larry

Re: Spring fling turning day.

#8

Re: Spring fling turning day.

john lucas

>Larry You may have to make it happen. We just started a club here in Cookeville, Tn. I had been (actually still do) drive to Nashville,96 miles and to Crossville (30 miles) to other clubs. When I first joined a club it was the Tennessee Association of Woodturners. It was the only one in the state. That was around 1990 give or take a year or two. Now there are 7 that I know of. You just have to get out there and and find a few other turners close by and then find a place to meet and start one. Our Cookeville club was started by 3 of us and grew to 8 pretty quickly. Now it's up to about 16 just 2 years later. We still have fairly small meetings usually averaging about 7 to 10 but were working on that. As you can tell from WC and other turning sites you can't meet a better group of people.

Re: Spring fling turning day.

#9

Brad Vietje

Cool ! What Fun !

Brad Vietje

>Looks like a blast, John. I hope to host a small gathering this summer for area turners I know. I like your suggestion about holding a sharpening clinic -- can really change a newbie's progress dramatically.

I just picked up a used Nova Comet mini lathe, which is a lot of fun. Is yours a Comet or the VS Mercury ? If Comet, did you modify the sheet metal belt cover to close all the way ? Mine seems to need a little bit of metal ground off to close completely and get the foam gasket to seat on the casting. Still, its a blast to use, and I may even prefer it to my bigger lathes for ornaments, tops, and such.

Safe spinning,

Brad Vietje

Newbury, VT