Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

CHALICE

Posts

CHALICE

#1

CHALICE

Bill Hale / Woodspinner

>I got an order to do a chalice. It will be used in services.

I know that they are to have a gold linning but I did not do it as it was not wanted.

This is 4 " wide and 9" tall from Box elder. I had wanted to use hard maple but could not find the size needed. It does have a nice feel and balance.

Plesae let me know what you think.

Good turning and be safe

Bill in Casa Grande, AZ. 105 today

Re: CHALICE

#2

Re: CHALICE

Allen Neighbors

>Bill, I think these pics are beautiful. It's not so dainty that it will break if dropped, and yet it's still ornate enough to be used in Services. Anyone should be happy to take communion with this chalice. You did a good job..

I think you need to make sure the finish inside is hardy enough that it will not stain from the wine (or juice). I've made a couple of these that were used in our Communion Services. The inside should have enough finish that it won't be permeated by the liquid if it's left in there for a while.

A lacquer sealer, ala Carole, should seal it enough. She uses a 50/50 mixture of lacquer and lacquer thinner. I'd finish sand, then put on the sealer, then finish sand again, and repeat the sealer. After it's cured, it's food safe.

Just my 2 cents...

Allen