Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Everyone needs a Log Stretcher

Posts

Everyone needs a Log Stretcher

#1

Everyone needs a Log Stretcher

Phil Joines Krum, Texas

>Not that kind :>) It's made from a 6' 2x10 and a 2x4 ripped down the middle at 45 degrees. The screws were removed after the glue dried. Realy makes cutting easier.

The pic is a load of Mesquite after cutting to manageable size. We'd roll the big boys onto the stretcher, cut them and roll them back on. Around here Mesquite is considered "trash".


img

Re: Everyone needs a Log Stretcher

#2

A closer shot

Phil Joines Krum, Texas

>The 2x4's keep the logs from rolling off the sides. Stuf slides around on it prity easy too. If I'm ripping one I cut most of the way through, roll it over and finish the cut from the other side.


img

Re: Everyone needs a Log Stretcher

#3

Re: A closer shot

Chip in Plano

>That's my kind of trash. Need any help removing it?

Re: Everyone needs a Log Stretcher

#4

Definite Need

Al Kapocius

>Just cut some 2x4's too short. Cut them agin and they were still too short.

Mebbe the log stretcher might work on the 2x4's. How does it work?

Al Kapocius