Hollow log vessel
Gary in Zirconia, NC
>I haven't posted a photo in a while so here's one from a hollow sourwood log.
Knowledge You Can Build On — Est. 1998
Hollow log vessel
Gary in Zirconia, NC
>I haven't posted a photo in a while so here's one from a hollow sourwood log.
Re: Hollow log vessel
Gary in Zirconia, NC
>Here's the next one out of that log.
Re: Hollow log vessel
Jennifer@Indy.USA
>Gary, these are cool. I love the orientation. I'm trying to figure out what the heck that log looked like before you got it on the lathe? Very interesting pieces both of them.
Nice job!
Jen
Re: Nice hole Gary!
JL
>That's a nice piece of wood there.
Re: Hollow log vessel
Jorge Castaneda ~ Downeast Maine
>Nice looking pieces Gary,
Like Jen I wonder how the log looked and how you tackled it.
So you got the knak of turning air down path.
Looking forward to see more of your work,
Thanks
Jorge
Re: Hollow log vessel
Gil Jones on Lake Seminole GA.
>That piece really does look cool!
I have one small Sourwood log,
and have been wondering what it (the wood) will look like.
Thanks for answering my thoughts.
Re: Hollow log vessel
Allen Neighbors
>Gary, I asked you this question at the Gathering, but have forgotten what you answered? How did you keep it together while turning? Tape? Did you CA the bark?
Both of these are awesome! You surely have the touch!! Keep it up!
That Rhododendron Root you had at the Gathering is still fixed in my memory... I liked the way it moved as it dried. I'd like to see some more of your work.
Allen
Three hollowforms w/collars and I'm still not satisfied... :o(
Re: Hollow log vessel
Carole Valentine
>Wow, Gary!They are beautiful! Like Jen, I would like to see what the heck that log looked like to start with! Don't know that I would have had the guts to mount that one, but then I am basically a chicken! LOL
Re: Hollow log vessel
Stephen Mushinski
>Gary,
This is wonderful. Not sure I could make something like that yet. Someday! I do owe you a phone call. - Steve
Re: Hollow log vessel
keith zimmerman, Normal IL
>I am also amazed and wondering what the orientation of the blank was. Would you elaborate? Or, maybe you could take a picture of the next one when you start it, and a picture when it is complete. That would serve to solve the mystery.
Those are gorgeous, Gary!
keithz
Re: Hollow log vessel
Gary in Zirconia, NC
>These hollow forms were turned in the normal face plate oreintation. Here is a photo of a simular log. I will post a photo of the piece I turned out of it. The piece at the gathering was from this log also. These bigger ones were reinforced with tape and/or metal bands. The ones above are only about 10 inches and didn't require reinforcing.
Re: Hollow log vessel
Gary in Zirconia, NC
>I believe this tree was struck by lightning, then curled around in an attempt to heal the split. This piece is my favorite. It shows both where it tried to heal together and where the split began. Size: 18 inhes X 18 inches.
Re: Hollow log vessel
Gary in Zirconia, NC
>Here's a shot of it on the lathe.
Re: Hollow log vessel
David Galloway
>Gary, that is remarkable. First to envision the piece, secondly to do it. Thanks for posting the pictures so that we can understand how you do that voodoo you do.
David
Re: Hollow log vessel
Jorge Castaneda ~ Downeast Maine
>Thanks Gary,
It is remarkable that you end up with beautiful work were all we see is firewood. Kepp up the good work, Thanks for sharing!
Jorge
Re: Hollow log vessel
keith zimmerman, Normal, IL
>Thanks for posting the photos Gary. It sure helps to be able to visualize what you are doing.
keep turning
keithz
Thank you, Gary!
Carole Valentine
>I think you may have helped me expnd my visual horizons when I look at logs! I am still not sure I have the ability to be able to see what you see though.
Re: Hollow log vessel
Keith Tompkins
>Mine too! bravo!
Re: Hollow log vessel AWESOME!
Ruth Niles
>Gary, these 3 pieces are really awesome. I have to try this, it won't work for me, but I have to try it just the same. : )
Re: Hollow log vessel
Allen Neighbors
>Gary, would you tell us what sort of hollowing rig that you use?
I've never seen anything like this when I look at firewood... but I'm going to look closer from here on out.
These pieces are absolutely AWESOME!! I'm in awe of your abilities..
Allen
Re: Hollow log vessel
Gary in Zirconia, NC
>Allen,
I use a shop made Jamison System.
Re: Hollow log vessel
Terry Baker
>Gary...Is it possible you can email me the plans or drawings for this
"Shop Made Jamison System" you are using for this? Man it sure would be appreciated! Thanks!! Terry
Re: Hollow log vessel
Gary in Zirconia, NC
>Very easy to make. Look in Packard's or Craft Supply to see a picture of it. I made mine a little bigger than his. Mine is 8X21 inches for the D part. And the support is 40 inches. His is smaller. I do larger items so I made mine larger. You can also make it very small for mini lathes. Mine is made with 3/4 cold rolled steel.
Re: Hollow log vessel
tek-Brunswick, Ohio
>Great stuff Gary! Next week I'll probably be blowing stuff up on the lathe trying turn some hollow pieces of wood! ;)
Tom
Great work Gary......
TDaniel
>I love to see work that utilizes the natural character of the wood instead of enhancements; this piece is the ultimate. It could never be made of plastic; it is what it is. I appreciate your skill that allowed you to bring the best out of this piece of wood.
TD