We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Hi Folks, does anyone know where I can have a custom made banjo made for my antique lathe?? I am getting tired of reaching under the thing to lock it down. I have a handicap student who will need something more conventional to operate. Thanks all.
>Joaz, I made a clamping block out of 1/2" aluminum for a modification to one of OB's Hollowing rigs, for a friend of mine. I threaded a 1/2" bolt into the clamping block and put a wing-nut on top that tightens it. The clamping block will slide into the ways from the tailstock end. Of Course that won't work if the bolt can't extend through the banjo.
>I would suggest you look at the Oneway banjos. They are pricey, but (IMO) worth every penny. I used one from the 1640 on my old Fay & Scott pattern makers lathe. It was the second best investment I made in the lathe (VFD was the first).