Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

stands for Jet mini

Posts

stands for Jet mini

#1

stands for Jet mini

john lucas

>I didn't get much turning done this weekend. I spent my spare time building stands for my 2 jet mini's. I need them to be workable by this weekend. I'm having our 2 local clubs over for an all day turning session. I wanted to have 5 lathes if possible. I still need to get a longer belt for the mini that I'm installing a Vega variable speed treadmill motor. Does anyone know where i can get one that's about 16" from motor to spindle. I'm guessing that would be about 36 to 38" belt length. I'll post some photos when I get them done.

Re: stands for Jet mini

#2

Re: stands for Jet mini

Allen Neighbors

>John, I would suggest that you try an auto-parts store. Take a half inch wide strip of paper, and measure the distance around the pulleys loosely. Then get a belt and try it. one parts store in this small town gave me a couple of different sizes to try, when I was replacing the belt on Old Griz [the Lathe :o)]

Allen

Re: stands for Jet mini

#3

J Belt for Jet Mini *LINK*

Clem Wixted

>John,

Try these folks:

http://aarubcorubber.com/home.htm

I got this site from Fred in NC who said they are easy to deal with, inexpensive and ship fast. They have belts that match the pully on the jet mini in many lengths.

Clem


Source for Jet mini replacement J belts

Re: stands for Jet mini

#4

Re: stands for Jet mini

john lucas

>Allen Auto parts stores won't have one like the Jet mini takes. It is only about 3/8" wide with 3 raised ridges. My local bearing supply house only had one with 6 lands. I split it in half with a razor blade to get buy in an emergency but my cuts aren't perfectly straight and that will cause vibration.

Re: stands for Jet mini

#5

Re: J Belt for Jet Mini

john lucas

>Clem Thanks. I'm going to town to check out one other source. If that fails I'll give them a a call.

Re: stands for Jet mini

#6

Re: stands for Jet mini

Allen Neighbors

>"...three raised ridges..." - By 'ridges', I take it you mean like those serpentine belts on newer autos? I understand why you couldn't find them at the auto store. :o) Sorry I wasn't more help.

Allen

Re: stands for Jet mini

#7

Re: stands for Jet mini

john lucas

>I always appreciate any help, you never really know. I had already been to the auto stores. Thanks for the response. I did manage to find one this morning, they had to order it but said it would be in by Thursday. My local Rubber and Gasket company was very helpful. They also had really big hose clamps that I have been looking for so I picked up a few of those.

Re: stands for Jet mini

#8

Re: stands for Jet mini

Ed Heuslein

>John: I have a Vega (I believe) motor on my Jet Mini. It is actually a GE motor and controller from a treadmill. If that's what you have, check your motor rotation. Mine is ccw (as you look from the shaft end), so I mounted it on the outboard side of the lathe and used the same Jet belt. It just means a very little cutting of the opening where the existing cover on the lathe is. I have also successfully done the mods that allow you to turn off and back on at the same speed, good ramp up speed and, most importantly, reverse! Also, I have a secondary switch to turn the motor on and off rather than turning the speed control up and down when you want to stop the motor, etc. Let me know if you need more info. By the way, you will LOVE the torque this motor has.

Ed

Re: stands for Jet mini

#9

Re: stands for Jet mini

john lucas

>Ed That's the motor that I have. I rigged one of them up to run a really slow drive for an item at work. We had to turn a person at 6 rpm for a video we worked on. It had plenty of torque to do that.

I'm mounting it below the lathe in the lathe cabinet. I'll install a a fan and some filters down there to keep the controller and motor cool. I'm also going to wire in an outlet so that you can have some AC for sanding, lights, etc.

Re: stands for Jet mini

#10

Reverse for Jet Mini

Clem Wixted

>Ed,

I have a Vega motor and controller waiting to be installed.

Do you have instructions for the mods for reverse and ramp up speed control?

Thanks, again for your advice.

Clem

Re: stands for Jet mini

#11

Re: stands for Jet mini

bernie feinerman

>Hello ed,

I think I hve the same motor/comtroller tho it predates the Vega's.

Could you send me a copy of your speed and motor/on/off mods?

Re: stands for Jet mini

#12

Re: stands for Jet mini

Gary R

>I checked with Vega a while ago, and those motors are no longer available. I've been looking at offerings on E-Bay - numberous.

Could you send post/send me the specs on the package you have? I'd like to see about converting my Jet Mini.

Jet now sells the VS as a kit, but it's over $200.00 shipped. It's not tru VS as you still have the three belt positions, and it does not go that slow.

There are a number of DC motor offerings that shoudl work - just want to try and match them up since you have a good "high torque" unit to benchmark.

Thanks

Re: stands for Jet mini

#13

Re: stands for Jet mini

Ed Heuslein

>Howdy Y'all: Wow! I didn't expect this response. Give me a couple days to get back in the shop and make up a diagram and simple instructions. I'll post it as a new posting rather than refer to this one.

Ed

Re: stands for Jet mini

#14

I'll be watching for it!

Clem Wixted

>