Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Attaching a finial???

Posts

Attaching a finial???

#1

Attaching a finial???

keith zimmerman, Normal IL

>I just created a lidded walnut bowl with a maple lid and walnut finial and had quite a time attaching the finial. I realized that I didn't know any techniques. I cut the tenon on the finial about 3/16" long, then drilled a 1/4" deep hole in the lid. I glued it in with CA, but it didn't hold. I then tried wood glue and it didn't either. I finally wound up using 5-min epoxy which did work. There has to be a better way!!!

Would some of you share your technique for attaching finials?

Thanks in advance.

Here is a photo of the bowl. It is about 7" in diameter and 7" tall with the lid and finial.

keithz


img

Re: Attaching a finial???

#2

Keith Tompkins

Re: Attaching a finial???

Keith Tompkins

>Hi Keith, there are several ways to attach a finial. I think it's important to make the round tenon long enough to really support the finial, and to make a good, solid fit.

If the finial is long enough, regular wood glue will hold it. I also thread many of my finials in; that way they can be removed.

Another way is to drill the hole for the finial all the way through the lid, make a long tenon just a touch longer, and then split the tenon with a fine saw. Glue the tenon in, and drive in a wedge of contrasting wood. Sand off flush...hope this helps!

Re: Attaching a finial???

#3

Re: Attaching a finial???

Phil Joines Krum, Texas

>Keith,

I knew there had to be some reason I've made all those bowls with the holes in the bottom.

They want to be goblet cups with wedged stems. :>)

Re: Attaching a finial???

#4

Re: Attaching a finial???

Kevin Gerstenecker

>Nice looking work Keith, excellent! I like the contrast of the wood choice, and the form is very pleasing. Sorry I can't help with the Finial fastening question, the few I have done I just glued in with CA or wood glue and they were fine, but as you know, "stuff happens"!

Re: Attaching a finial???

#5

Re: Attaching a finial???

john lucas

>Keith I try to make my tenons as long as I can and fairly snug fit. If they fit too snug you'll get a starve glue joint so I want it to fit just right. If the tenon is long enough I will cut a couple of very small notches in it to give the glue something mechanical to hang on to. Most of the time this is a side grain to long grain glue joint which isn't really that strong.

If the tenon is short or the top really thin I will make the tenon long enough to go all the way through and then turn some little detail piece to go on the underside of the lid to fit on the tenon that pokes through.

I like kieths idea of threading the tenon but many of mine are very shallow and I don't think I can thread them.

Re: Attaching a finial???

#6

Re: Attaching a finial???

Allen Neighbors

>Thanks for that idea, John. I'll have to file that away under "really nice to know ideas". (Turning a little detail piece to grab onto the finial, under the lid) You always give us good ideas.

Thanks again,

Allen.