Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

How do I get rid of anchorseal coating??

Posts

How do I get rid of anchorseal coating??

#1

How do I get rid of anchorseal coating??

KurtK in Indy

>I have a walnut blank that is coated with anchorseal and I want to keep the rough shape of the outside of the blank. What can I use to cut the anchorseal?? I think trying to soak it in soapy water wouldn't do anything but make a mess but I'm at a loss for what to do.

Thanks for any and all help.

Kurt

Re: How do I get rid of anchorseal coating??

#2

Re: How do I get rid of anchorseal coating??

Allen Neighbors

>Kurt, if you're talking about taking it away so you can finish it, I don't know. Especially if you're talking about saving bark.

Maybe some chemical will melt away the wax. But to get it completely gone... beyond me. Sorry

Allen.

Sleepy, in TX

Re: How do I get rid of anchorseal coating??

#3

Re: How do I get rid of anchorseal coating??

Jennifer@Indy.USA

>Kurt, I'd try a do it yourself car wash place? Most have settings for hot water...even the soapy setting might not hurt..and might help to get rid of the wax?

Just a thought?

Jen

Re: How do I get rid of anchorseal coating??

#4

Re: How do I get rid of anchorseal coating??

john lucas

>I've never tried to get rid of it either but I would think Mineral Spirits might make a dent in it. I use it to remove a product we call Tacky Wax at work. It's very similar to End grain sealer only thicker.

Re: How do I get rid of anchorseal coating??

#5

Re: How do I get rid of anchorseal coating??

Kurt Rosenzweig

>How about a DNA soak? The wax will probley float to the to. Just a guess.

Re: How do I get rid of anchorseal coating??

#6

Contact UC Coatings

Clem Wixted

>From their web site:

U�C Coatings is happy to help you with any questions you may have regarding our products and services. Please feel free to contact us at any time at the address below. We are here to accommodate you and your business!

Postal Service:

U�C Coatings Corporation

P.O. Box 1066

Buffalo, NY 14215

U.S.A

Phone / Fax:

Tel: +1 (716) 833-9366

US/CN Toll Free: 1-888-END-COAT

Fax: +1 (716) 833-0120

Email: webinfo@uccoatings.com

Re: How do I get rid of anchorseal coating??

#7

you might try naptha

MFoster

>Naptha is the solven of choice when removing wax for french polishing, and I've use it to remove both paste wax and carnuba wax. I don't like using such sovents unless absolutely necessary, and wear a carbon filter and ventilate well when I do. It does work well for these but I've never tried it on anchorseal. I usually just turn the anchorseal away as I usually only use it on blanks and rough turnings.

Re: How do I get rid of anchorseal coating??

#8

Re: How do I get rid of anchorseal coating??

Brian Hahn in SW Wisconsin

>A paint solvent like naptha or mineral spirits will dissolve it. Kerosene should also work and it's cheaper. A degreasing solvent like MEK (methyl ethyl ketone) or acetone will also cut the wax. They are more volatile and need to be used with adequate ventilation - like outside.

Hot soapy water will also work. Use water as hot as possible to help melt the wax and dish washing detergent to carry the wax away.

You'll probably still have wax in the pores of the wood so a seal-coat of shellac (1 lb cut) would be a good idea before you try to put a finish on the wood. Of course that wouldn't be necessary if you wanted a wax finish.

Re: How do I get rid of anchorseal coating??

#9

Mineral spirits did the trick...thanks

KurtK in Indy

>