Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

How is sweet gum for turning?

Posts

How is sweet gum for turning?

#1

How is sweet gum for turning?

Bert Workman

>I have access to more than I can cut and carry. I'm new to the South and new to sweet gum. Is it diffuse porous? Good for salad bowls? Should I only look for interesting crotch pieces?

Along with the sweet gum is a faily large Cherry. I know what to do with that one!

Thanks, and If things go well I might have wood to share.

Bert

Re: How is sweet gum for turning?

#2

Re: How is sweet gum for turning?

Mark Kauder, Phenix City, AL

>Sweet Gum is very wet, when fresh. Roughing it is like turning a Potato. It distorts quite a bit while drying and is prone to cracking. But is BEAUTIFUL if you get it finished. It is sometimes calle Alabama Mahogany.

Mark

Re: How is sweet gum for turning?

#3

Re: How is sweet gum for turning?

Jim Underwood

>I turned a natural edge bowl out of some (supposedly) Sweet Gum, but it looks for all the world like Poplar to me. Perhaps it's just been labeled wrong.

I have another bowl that I've roughed out, that is spalted and sap stained, looks a lot like Ambrosia Maple, that is supposedly Sweet Gum.

Both are pretty easy to turn though.

But I've not actually cut down a tree that I KNOW is Sweet Gum and turned it yet, so from first hand experience can't verify it. Does it really look like Mahogany? If so, I may accelerate my plans to cut three of them down in my yard. Pesky seed balls...

Re: How is sweet gum for turning?

#4

Re: How is sweet gum for turning?

Mark Kauder, Phenix City, AL

>You are sure right about the seed balls.

I forgot to mention, that the sapwood has been used in the furniture industry in the past for a Soft Maple, so it is quite a contrast to the dark, chocolate-y, hartwood.

Mark

Re: How is sweet gum for turning?

#5

Thanks,

Bert Workman

>I picked up several pieces, some of them kinda large. I'll see if I can't rough out a few bowls or something. I'll let you know how it goes and hopefully I'll have something worth taking a picture of.

Re: How is sweet gum for turning?

#6

Ric Taylor

Re: How is sweet gum for turning?

Ric Taylor

>I have turned a bunch of dried sweetgum. It is very easy to cut, sand and finish, and I've had no problem with distortion or cracking.

Ric