Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Hollow Forms

Posts

Hollow Forms

#1

Dick Hines

Hollow Forms

Dick Hines

>I have benn doing a lot of hollow forms lately and last night while the sky was falling I got to thinking about what effect the moisture in the air had on hollow forms with glued in finiels. Especially on forms turned from wet wood.

Would it be a good idea to drill a small hole in the bottom of the form to let any pressure difference, if any, be equeal.

It was just a thought of a wondering mine while waiting for the thunder storm to pass.

Re: Hollow Forms

#2

Re: Hollow Forms

Barry Irby

>Dick, I would think the wood is porous enough to allow for pressure equalization. It would be difficult (I think) to get a piece so perfectly sealed. OTOH, good reason to turn only wormy stuff. Doesn't matter to me, mine all crack anyway.

Re: Hollow Forms

#3

PS, a better Idea?

Barry Irby

>Turn only white oak, char the inside, perhaps in a decorative fashion, fill them with Bourbon and seal them. Let them age. Years later drill the little hole to decant them. I bet they would sell.

Re: Hollow Forms

#4

Dick Hines

Re: PS, a better Idea?

Dick Hines

>Sounds like a good idea but I would not get to enjoy any of the good stuff. I don't drink. Seems like a waste to go to all that trouble.

Re: Hollow Forms

#5

Keith Tompkins

Re: Hollow Forms

Keith Tompkins

>Hi Dick, when I turn hollow forms, I leave the wall thickness heavy, then allow to dry. Then, I turn them to finish size. Almost all are end-grain turnings and the collars are oriented the same grain direction as well. Hopefully, all moves in the same direction. The finials are spindle turnings, which I usually thread it. I haven't had much trouble doing it this way.

You may want to apply finish to the interior as well as the exterior.

Re: Hollow Forms

#6

Re: PS, a better Idea?

Allen Neighbors

>Barry, I busted a gut when I read that post. Made my wife laugh, too. Funny post, but thanks, anyway.

Allen

Looking for oak in Texas :o)

Re: Hollow Forms

#7

Re: PS, a better Idea?

Dave Belser

>busted a gut too..

and then though - is there anyway I could turn a cask through a tap hole?

I need to get some sleep.

- Dave

Re: Hollow Forms

#8

Even Better

Barry Irby

>Dick if you don't drink, this is even better. If youe were a drinking man it would be a shame to sell them after all the work, but if you don't drink, you won't be drinking up all the profit.

Reminds me of the days when some group used to call, trying to sell "five Year" light bulbs to raise money for the blind. One day I asked the woman if she were blind. "No" I told here Shame on her for taking a job perfectly suited for a blind person. Then it dawned on me that this was a perfect thing for the blind to sell. They have no use for light bulbs anyway.