Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Reeves drive pulleys

Posts

Reeves drive pulleys

#1

Reeves drive pulleys

Spence in Rhode Island

>Well after 16 years of turning My old Griz lathe has finaly had a major breakdown. The reeves style motor pulleys broke and Grizzily no longer stocks that size for the G1495 lathe. Anyone have an idea where I can find a replacement? They have an O.D. of about 5 1/4 inches and fit on a 5/8 inch motor shaft. Even though I'm going to get a PM3520B as soon as the Harley sells, I'd still like to keep the old Grizz up and running.

Thanks in advance for any help.

Spence

Re: Reeves drive pulleys

#2

Re: Reeves drive pulleys

Peter Teubel

>I'll bet the Jet 1236 parts are interchangable...

Re: Reeves drive pulleys

#3

Re: Reeves drive pulleys *LINK*

Mark Wollschlager

>If the Jet part does not fit.

This was posted in the Delta Lathe Blues thread a while back.

It has a link to MSC page with that type of pulley.

It may help.

mark.


Re: Delta Lathe Blues *LINK*

Re: Reeves drive pulleys

#4

Thanks guys but....

Spence in Rhode Island

>it looks like the Jet pulleys are the same size (4 1/2") as the new Grizzily ones. Not sure about the Delta though as I haven't found a clear pic of them yet. The ones I need are about 5 1/4 inches so if someone could measure them I'd really appreciate it. As for the McMastercarr ones they seem to have a bearing built in so I'm not sure how that would work. Ain't anything ever easy? LOL

Thanks,

Spence

Re: Reeves drive pulleys

#5

Re: Thanks guys but....

Bob Fawcett

>Spence,

The jet ones may work with just a belt change.