Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Bushing Chart Pen Makers

Posts

Bushing Chart Pen Makers

#1

Bushing Chart Pen Makers

Dustmaker Mike

>Hello All I was just wondering is there a chart that tells which bushing kit will work with each type f pen kit? I have a few kits from Berea and Woodcrafter and I was wondering the interchangability between them and say the Penn State pen kits etc. I don't mind buying tools when needed but how many bushings do you really need? Along with that the mandrels also?

Mike not sure which Time Zone I am in this week Ithink I am home when I wake up I will know for sure (-;

TIA

Re: Bushing Chart Pen Makers

#2

Bob Moffett

Re: Bushing Chart Pen Makers

Bob Moffett

>There is a table in the Penn State catalogue that tells which bushing to use with which pen kit.

Re: Bushing Chart Pen Makers

#3

Re: Good question

MA

>I've run into incompatibilities with pen bushings and mandrel shafts. From my very limited experience [I ran into this just a week ago] Woodcraft pen bushings use the same mandrel shaft size regardless of pen bushing type. Rockler bushings call out two different shaft sizes. The shaft itself is not compatible between Woodcraft and Rockler mandrels. Bought the larger shaft at Rockler and tried to use it with my Woodcraft mandrel -> no good. The threads and thickness of the threaded end were completely different. I'm about ready to order from Pen State and have the same concern.

Re: Bushing Chart Pen Makers

#4

Re: Bushing Chart Pen Makers

Russell L. Babbitt Jr.

>You might try looking at this site. I know its been talked about in the past. Good luck.

http://www.penturners.org/forum/portal.asp

Re: Bushing Chart Pen Makers

#5

Re: Bushing Chart Pen Makers *LINK*

Phil Joines Krum, Texas

>There is a chart on the Penturners site. It dpesn't have all of the mandrals or the bushing diameter but does list all of the part numbers.

Scroll down near the bottom of the page and look for Daniel's Giant Pen Kit List.


http://www.penturners.org/forum/portal.asp

Re: Bushing Chart Pen Makers

#6

Thanks I needed that

Dustmaker Mike

>I have a few weeks at home and wanted to make a few Gifts for friends.

Re: Bushing Chart Pen Makers

#7

Re: Bushing Chart Pen Makers

eaglesc

>Mot charts I have seen were a waste of effort on the part of the author.

MFGRS part numbers don't cross refrence.

There are some kits sold by wood craft that are similar in appearance to the MFGRS but the bushings are different.This is probably one reason Woodcraft is discontinuing so many styles made by Berea.

Case in point.

Berea sells a "perfect fit" but make the bushings so it needs the "b" mandrel.

Woodcrafts version was called the

"convertible pen"

but could be made on the regular 1/4" mandrel.

I have seen posts stating there is a 10 mm mandrel for cigar kits not sure where I saw that.

Bottom line is most suppliers want you to use their bushings with their kits.

If you are not making your own bushings to match the components of each kit(or miking the blank to the dimensions ofthe components you may run the risk of a poor fit.)

This is possible even with the bushings that are made for each kit.

Bushings are a wear item, they don't last forever.Ammortized over the amount of pens a set will make they are relatively innexpensive.