Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Finish for a carving mallet?

Posts

Finish for a carving mallet?

#1

Finish for a carving mallet?

Carole Valentine

>I was going to use a beeswax paste, but then I thought there was a chance that carvers prefer no finish at all - just a patina built up from body oil and use? What is the preference? I made this one as a gift so I really can't ask the fellow. Guess I should post this on the carving board come to think of it.

Re: Finish for a carving mallet?

#2

Re: Finish for a carving mallet?

Jim Pugh, Ohio

>suggest you tell him it is a "do it yourself kit". You made the mallet and he can put on whatever finish he pleases.

Re: Finish for a carving mallet?

#3

Re: Finish for a carving mallet?

Carole Valentine

>That's probably a good idea, Jim, but it just doesn't look like a finished gift that way, even though it is finely sanded. Have to do something tonight, so I guess I will use the wax and just buff it. That always feels best to me on my tool handles and the head is going to get beat up anyway! LOL

Re: Finish for a carving mallet?

#4

Re: Finish for a carving mallet?

john lucas

>Carole I think I just used an oil finish on mine. It's about 6 years old now and beat to death. I turned it out of partially green Apple and it split about 6 months after I made it. I filled the split with epoxy and then carved away the excess after it dried. I've been using it this way for 6 years and the only part that is wearing was a layer of sap wood that I left on one side.

Re: Finish for a carving mallet?

#5

I'm not picky Carole. Oil or B-Wax. :)

Jennifer@Indy.USA

>

Re: Finish for a carving mallet?

#6

Re: Finish for a carving mallet?

RobinCorell

>Beeswax is my prefered finish for any handle. Learned from an old time carpenter that the first thing to do with a new hammer is to sand off the paint or varnish and apply a coat of beeswax. This prevents blisters. It sounds to simple to work but it really does. A sealer type finish will slip slightly in your hand once you start to sweat a little. The beeswax eliminates that and the blisters that go with it. I use beeswax on all my tool handles with no regets or exceptions. On really abused tools like framing hammers and shovels it helps to reapply every once in a while. and don't bother working it in like on a bowl. just rub a bar over the handle and twist it in your hands a bit.

Chinese Elm also makes an excelent mallet.

Robin

Re: Finish for a carving mallet?

#7

Re:Carole- BLO works well.

JamieDonaldson

>

Re: Finish for a carving mallet?

#8

Thanks all

Carole Valentine

>I used the Beeswax/BLO mix that I use on my handles. He likes it, but it is a little light so I am going to drill it, add some weight (lead or shot) and plug it for him.