Ebony Bowl
Mark Kauder, Phenix City, AL
>This is a little 6" dia bowl that was commisioned from me by a guy who's wife had bought a 4" piece of mine for him for Christmas. It is Ebony, Holly, Maple, Bloodwood and black veneer.
Mark
Knowledge You Can Build On — Est. 1998
Ebony Bowl
Mark Kauder, Phenix City, AL
>This is a little 6" dia bowl that was commisioned from me by a guy who's wife had bought a 4" piece of mine for him for Christmas. It is Ebony, Holly, Maple, Bloodwood and black veneer.
Mark
Re: Ebony Bowl
Keith Tompkins
>These are super pieces Mark! Is the bottom on this piece laminated veneer? If so, it's a technique that works well for me.
Re: Ebony Bowl
Jennifer@Indy.USA
>As usual, Mark....Top Shelf! Beautiful.
Jen
Re: Ebony Bowl
Molly Winton
>That is really striking Mark. The form is delicious!
Re: Ebony Bowl
Steve in NC
>Mark
Both pieces are exceptional. I admire your patience to glue up these segmented pieces.
Steve
Re: Ebony Bowl
JL
>That's a pretty chunk of ebony (and the other stuff too:)).
Re: Ebony Bowl
Ron in Drums PA
>Both are really wonderful pieces Mark.
Re: Ebony Bowl
Glenn Hodges
>Mark this one is absolute perfection in form and color.
Re: Ebony Bowl
Mark Kauder, Phenix City, AL
>Hi Keith,
What you cannot see, is that this piece along, with about 90% of my segmented pieces, has a solid bottom (Ebony in this case) then three cross grain laid pieces of Veneer. The veneers in the middle of the bowl are segmented pieces, and then the top veneer layers are solid cross laid pieces. The neck for most of my pieces is solid as well
I think that adding what amounts to a 3 layer plywood top and bottom adds some strength against movement cracking the joints.
Only time will tell.
Mark
Re: Ebony Bowl
Ed Kelle
>Very dramatic, I love the form as well. great job
Re: Ebony Bowl
john lucas
>Mark Beautiful Bowl as always. Years ago when I was doing segmented work I was having trouble with my bottoms moving using solid wood. Then I read through my copy of Beyond BAsic Turning by Jack Cox again and I found one sentence that was worded funny but basically it implied that he was gluing up wood in layers to produce a sort of Plywood for the bottom. That fits in exactly with what you just said.