Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Router Speed control for grinder? Safe?

Posts

Router Speed control for grinder? Safe?

#1

Router Speed control for grinder? Safe?

Craig Daymon

>I have a Delta 6" grinder. I am a pitiful sharpener and I think I would really benefit by slowing this thing down. I have a router speed control for my router table, but that's not up right now and is in the process (typically quite long) of being redesigned.

Can I/Is it safe to use the speed control to slow the grinder down? Is this a reasonable thing to try?

Thanks in advance,

Craig

Re: Router Speed control for grinder? Safe?

#2

Re: Router Speed control for grinder? Safe?

Bob Fawcett

>Craig,

Those router speed controls are for universal motors. Most grinders use an induction motor. If your grinder is an induction motor, it won't work.

High speed grinders are fine for sharpening lathe tools. The trick is the wheel and a light touch. If you don't have one, get a "soft" wheel and use a light touch.

Look in the articles section under hand tools and you will find several items on wheel selection.

You may benefit from a jig as well, if you don't already have one. I made mine from the information here:

http://aroundthewoods.com/sharp.shtml

Re: Router Speed control for grinder? Safe?

#3

Re: Router Speed control for grinder? Safe?

Craig Daymon

>I have the OneWay jigs, Wolverine and Vari-Grind as well as Leonard Lee's video on sharpening (mostly not turning related) and the AAW video. I did do much better today than yesterday, though I did make a mess out of a 1" roughing gouge that I was trying to grind like Eli Avisera. (He knocks the corners straight back and it is a fantastic tool for roughing down spindle stock, cutting tenons on the ends and even works well like a skew to get a very smooth finish cut.) Luckily, it was a cheap gouge and it will give me more chance to practice grinding.

-Craig

Re: Router Speed control for grinder? Safe?

#4

Re: Router Speed control for grinder? Safe?

Bill Howatt

>I use white aluminum oxide wheels. As mentioned a light touch is necessary. A slower wheel isn't going to change the knack you need to develop for shaping. As you found out, the Vari-grind still relies a lot on your skill for the final shape.

You just have to keep practicing which means grinding away your tool but the light touch makes sure they don't evaporate too fast. Also, don't consider a lathe chisel to be like the lathe, the lathe should last a lifetime, the chisel is a consumable. If anybody's chisel is the same length as when they bought it, then they didn't do any turning or they had the most miserable experience in the world by turning with a dull chisel.

Bill

Re: Router Speed control for grinder? Safe?

#5

Re: Router Speed control for grinder? Safe?

Craig Daymon

>I do wish the Vari-Grind was made of a composite material, maybe a phenolic, that would reduce the weight associated with the jig. I think this might make a light touch easier.

I'll keep practicing.

-Craig

Re: Router Speed control for grinder? Safe?

#6

Re: Router Speed control for grinder? Safe?

Bill Howatt

>Hi Craig,

It's hard to say but the long somewhat heavy handle of the gouge also makes it hard to gently "touch and turn" on the wheel.

Everything I've bought from Oneway always seems to have more steel than you could get by with. Probably the reason their stuff doesn't fall apart!

Bill