Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Help!!!! Help!!!!!!!!!!

Posts

Help!!!! Help!!!!!!!!!!

#1

Help!!!! Help!!!!!!!!!!

Roland McClure

>Would someone please take a look at a bowl made of pine and cherry,on

John Sankey's web site (http://sankey.ws/woodwork.html) and in the

Inlay turning section showing a glued up block and the finished bowl.

My question is how the block was cut and stacked for turning????

Thanks Roland

Re: Help!!!! Help!!!!!!!!!!

#2

Very Carefully!

Barry Irby

>

Re: Help!!!! Help!!!!!!!!!!

#3

Re: Help!!!! Help!!!!!!!!!!

georgetroy

>Yes I can. That bowl was made by stacking boards and laminating them. The stack was then cut on the band saw into a square. What a waste of wood. Flat segmenting would use less. This angle process is very similar to that done on the Rudy Osolnik rolling pins. In my opinion Pine is not the greatest wood for turning and with that Oak in there you do have quite a challenge. Repeating the site again.

http://sankey.ws/pine.html