Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Gathering goals

Posts

Gathering goals

#1

Gathering goals

TDaniel

>I have received some nice letters about our "Gathering". The goal was to have something for everyone, beginner to advanced. Too many times the oraganized "events" leave the beginner behind; we tried to include beginners in our demos. From basic chainsaw use and sharpening to bandsaw safety and use to turning a bowl we tried to cover the basics while simultaneously there were advanced classes going on. Did we accomplish the goals? Did you learn the things you needed to learn? Should the next one, (did I say next one), be geared more toward the advanced or did we succeed the first try? Enquiring minds want to know.....:)

TD

Re: Gathering goals

#2

JL

Re: Gathering goals

JL

>Do you want to be inclusive or exclusive? Having a range of events may be the answer. Intermediate to advanced. Having two or more demos at a given time seemed to work. Of course when you had to choose between which demo to attend..

Re: Gathering goals

#3

Re: Gathering goals

Andy Blackwell

>Have the demos repeat, once in the morning and repeat in the afternoon. Then people will not have to make tough decisions when they want to see two demos and they are scheduled at the same time. Just my $.02.

Re: Gathering goals

#4

Re: Gathering goals

Bob Fawcett

>Terry,

As one of the beginners, I would say you succeeded tremendously. I got a lot out of the demos I attended. Everyone was great and no one acted like we beginners asked stupid question.

If the more experienced turners got as much as I did (and I suspect they did) your choices and setup was on the mark.

Re: Gathering goals

#5

Re: Gathering goals

Ed Karch

>Terry

I thought I would spend most of my time watching the advanced demos but I probably spent more time watching Duane Leach than anyone else. You can't watch Duane turn without learning something new no matter what level of turner you think you are.

Re: Gathering goals

#6

Re: Gathering goals

Dick Gerard

>I was unable to attend the "Gathering", but as partial founder of AAW I wanted to wade in on the side of the beginner. It has always been my contention (and will continue to be my contention) that much more of the content of any meeting, gathering, migration, symposia or whatever name you call it, be devoted to the beginner and basics. Some of this has recently come to surface with Bonnie Kleins's continued efforts towards involving youth. But ... and this is a big but ... more needs to be done for the adult beginner. This will help advance their techniques and help develop them into an intermediate turner. Plus it keeps the interest growing. Seeing all the "sexy" techniques, tools, and turnings tends to discourage some people who think they will never attain that level, or they can't financially afford to get to the next level. Others are initially motivated but are soon frustrated when they try to replicate the latest fancy thing after they get home. This is woodturnings Achille's heel and its biggest weak spot. We need to cultivate the future turners and collectors just as we cultivate gardens ... over time and with lots of patience and TLC. The advanced, known named turners will always have a forum and a place in the spectrum of turning and any other media. But our future, in whatever endeavor, lies with the beginners. And there are probably (my guess) 100 beginners for every big name turner or artist.

OK, enough of my soap box. Let's hear from someone who was actually there. Sorry to be so verbose.

Re: Gathering goals

#7

Re: Gathering goals

RevDoug

>My experience was that the entire Gather was excellent. To rub shoulder with those who are known and selling in "the galleries" was great. To be able to lend a hand in helping other to learn a new skill was also great. The opportunity to try my had with tools and machinery that I normally don't have access to was also great. I wish some of the other lathes companies could have been there to allow folks to try their wares. However, with 5 different lathes available at your home, and others at the firehouse, the attendees had opportunities to try out several lathes. Some of the tools that you and other had were a pleasure to try out as well (did I mention that I now own a Texan bowl gouge?).

As for the demos, I had a blast watching all that I had a chance to see. I don't believe that I watched anyone without learning something. It was great to watch others turn. Just to see Allen Neighbors send curls across the room was worth the trip. I wouldn't change a thing. You hit the nail on the head.

Thanks again for the great time. You and your family were great hosts and I really enjoyed my time there. Maybe the next time we can get together and have the time for that lesson. I look forward to that time.

Turn 'em round,

Re: Gathering goals

#8

I agree

TDaniel

>Dick, I agree 100% with your comments. Our symps need to have more classes on basic skills for beginners. There are too many injuries because basic do's and don't's are not being taught. There are also a lot of turners that do not have a club withing driving distance but who could attend a once a year event further away; we met several at the Gathering in this category. The AAW mag should devote more of its pages to basic skills too. Basic skills are the building blocks that must come first, all the other stuff has its place....later.

TD

Re: Gathering goals

#9

Thanks Doug

TDaniel

>The offer still stands; whenever you can come for a day or two we'll play on a lathe; we may even experiment some with Russ's dyeing technique unless he plans to do that on his next video. :)

TD

Re: Gathering goals

#10

Thx Andy...

TDaniel

>Do you prefer scheduled demos or just let everyone do what they want and allow others to watch?

TD

Re: Gathering goals

#11

Bob, there is no stupid question

TDaniel

>Bob, we were all beginners at one time; there is no stupid question. This forum tries to fill in where other venues skip over and we see the beginner being overlooked far too often. Too much emphasis is geared toward enhancements and too little toward skill building. All are great but we need more balance. I am glad that you learned from the demos that we had at the Gathering; we tried to have balance in the scheduled demos.

TD

Re: Gathering goals

#12

Duane was good...

TDaniel

>and he was just freelancing it. That is what is good about the Gatherings...anyone can step up and do what he wants and if the crowd likes what they see they can stand around and watch a while and ask questions. I only wish I had had more time to get around and see some of the demos that were going on.

TD

Re: Gathering goals

#13

Re: Thanks Doug

Lan Brady

>Terry,

If school had been that much fun, I would have graduated with honors! From daylight to dark(and later), I was learning something. Only after seeing the pictures, did I realize how much I missed. I wish I could see it all, but not possible.

I cannot imagine doing anything that would improve my memories of the event. I sure hope there is another.

Thanks again, Lan

Re: Gathering goals

#14

Terry:

Jorge Castaneda

>I enjoyed the scheduled demos as well as a couple spontaneous I saw, I think a little of both is best. a Suggestion, a blackboard up front with the schedule of events of each day may be a good idea, easy to make any hanges that may come up.

Thanks

Jorge

Re: Gathering goals

#15

Re: Gathering goals

keith zimmerman, Normal IL

>Great time Terry. I am absolutely sure I learned something from everyone I talked to. I even learned a lot more about turning. It was impossible to watch or do anything without learning something. For example, I decided that I wanted to try turning something on your VB. Well, a small groupd gathered around me and was watching. No big deal, I've had people watch me before...on a lathe I knew. Well, someone noticed that I was having some difficulty once I got past the point of shooting shavings across the shop, and suggested I ask someone for some pointers. I did that, and I received an impromptu lesson from Duane Leach. He explained what was happening, why it was happening, and showed me a lot and made some suggestions that I wrote down and will be implementing. I finished roughing the bowl I was working on and it is now drying comforatbly at home. I have so many thanks for Duane and his attention. I got the same type of attention from Ruth, when I made a bottlestopper, using techniques she demoed. Thanks Ruth.

That is just a personal note about how this entire Gathering happened. I saw a lot of that exact scerio occuring all three days. That is the best memory I have of the Gathering 2006. Whos know, maybe next year, I will even be able to demo something.

Sorry this is so long, but I feel I have to share my personal insight to the event because I think it relates to your question.

keithz

Re: Gathering goals

#16

Re: Bob, there is no stupid question

Bob Fawcett

>Thanks Terry,

I really appreciate that and can testify that that is the case.

I believe the same thing and try to do likewise when the subject is something I know, or know where to find it.