Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Copper nail brand tutorial

Posts

Copper nail brand tutorial

#1

Copper nail brand tutorial

Molly Winton

>As promised, here is a brief tutorial of how to make brands using copper nails. As Russ posted previously, nails can be found at marine supply stores, or follow his posted link to buy online if you don't have a marine store nearby.

The wire used is nichrome wire. This can be purchased at hobby stores, Craft Supplies USA, but I've found the cheapest is via ebay (do a search for nichrome wire). The guage I'm using is 20 guage.

You will also need a burning unit and pen that can accept home-made brands. Hope this helps!


img

Re: Copper nail brand tutorial

#2

Re: Copper nail brand tutorial

Molly Winton

>The pictures are not the best, sorry, but it looks as if you can still read my instructions. If you have difficulty with this, email me and I'll send a larger size image.

Re: Copper nail brand tutorial

#3

Bless your heart Molly, Thank you!

Jennifer@Indy.USA

>

Re: Copper nail brand tutorial

#4

Re: Copper nail brand tutorial

Mac

>Molly, I sure hope that was a Maine potato and not one of those Idaho pretend ones......

Re: Copper nail brand tutorial

#5

Re: Copper nail brand tutorial

John Lucas

>Thanks Molly, that should be fun. I have some Nichrome wire and some copper rivets and my new Razor tip pin. Now I just have to find a project suitable.

Re: Copper nail brand tutorial

#6

Re: Copper nail brand tutorial

Barbara Gill

>Great tutorial. I have everything except the nails and they should be here soon.

Re: Copper nail brand tutorial

#7

Re: Copper nail brand tutorial

Eddie Pacheco, San Jose, Ca.

>Thank you, Molly. Now I see what Barbara Gill is trying to fabricate.

Do you also do a design on the nail head to transfer this to the turned piece? I also think copper rivets might be easier to locate and you won't ahve so much waste.

Also, may I ask again, what power supply is the one to get?

Re: Copper nail brand tutorial

#8

Re: Copper nail brand tutorial

Molly Winton

>Hi Eddie,

You can etch a design into the nail head, or file/shape the nail head into a design. I've done both. For my "Step Up to the Plate" entry I etched two curves in to the head of a nail to resemble the stitching on a baseball, and then used that to brand. I've also filed and shaped the nail head to make brands that look like a raindrop, triangle, arrowhead, and flower. You're only limited by your imagination and the size of the nail.

As far as a power source. I have the DetailMaster, but other units on the market work as well. Razer-tip has a pretty good power source and is affordable. They also make a pen where you can make your own brands. Other units include the Burnmaster, and Optima. There may be more. The main issue to pay attention to is whether the unit has strong enough power. You want one with at least 100 volts. (I think I'm saying that right!)

Re: Copper nail brand tutorial

#9

Dick Hines

Re: Copper nail brand tutorial

Dick Hines

>You may be thinking about watts. Watts is where you get your heat. More watts the more heat you get.

Re: Copper nail brand tutorial

#10

Thank you Molly

Craig Daymon

>

Re: Copper nail brand tutorial

#11

OK, thanks for the info, Molly.

Eddie Pacheco, San Jose, Ca.

>

Re: Copper nail brand tutorial

#12

Copper wire?

Phil Joines Krum, Texas

>Has anyone tried using copper wire? It's soft enough to forge into a lot of shapes.