Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Ambrosa maple anyone?

Posts

Ambrosa maple anyone?

#1

Ambrosa maple anyone?

Dominic Greco in Richboro PA

>Hello Everyone,

I just had a 31" diameter x 60' tall Silver Maple tree cut down. I figured that with my luck, the figure and grain would be as plain as hell. But that is not the case. It seems that the Ambrosia Beetle had a little dinner party with this tree. The wood features those classis pin holes and streaks of Ambrosia Maple. I've attached pictures to show you what it looks like.

I told the tree surgeon to leave the trunk in 2' long chucks. But he must have had a weird ruler. Cause' these logs are about 4' long!

Anyway, if you're local to the Philly/New Jersey Area (Im in Buck's County PA) and interested in picking up some rather LARGE ambrosia maple for FREE, please contact me. But don't wait too long. I already notified my Woodturning Club members.

See ya around,

My ugly mug


Dominic


img

Re: Ambrosa maple anyone?

#2

Re: Ambrosa maple anyone?

Bill Grumbine (Kutztown PA)

>Hi Dominic

I know I will be in your area in a couple of weeks! Right near your house as a matter of fact. I'll be sure to bring the truck and a change of clothes! That is, if you have any left by then.

Bill

Re: Ambrosa maple anyone?

#3

Already set some aside

Dominic Greco in Richboro PA

>Bill!,

I was just writing you an email stating that ifin' you wanted some, I'd save you a nice BIG piece! When you stop over, I'd be glad to help you load it. At least there's no steep hill littered with dog doo to traverse! :>)

See ya around,

Dominic

Re: Ambrosa maple anyone?

#4

Re: Already set some aside

Bill Grumbine (Kutztown PA)

>That's great Dom! In fact, I have plans for that chunk-o-wood already. I think it is going to take a road trip to Louisville with me so I can spin it on the Vega they are going to have there. There is nothing like a soaking wet piece of maple for fun turning!

I'll put the lift on the truck so we don't have to bust a gut lifting it.

Bill

Re: Ambrosa maple anyone?

#5

Re: Already set some aside

tek-Brunswick, Ohio

>What's wrong with you guys? No steep hill and dog poo? A lift truck? What is turning without a little man pain. Well at least you have the oooh, oooh, more power, thing going in the Vega and you will be slinging water with the wet piece. I guess you did leave a little fun in turning.

Re: Ambrosa maple anyone?

#6

Re: Ambrosa maple anyone?

Jennifer@Indy.USA

>I wish I lived closer :(

Re: Ambrosa maple anyone?

#7

Yeah, me too!

Dominic Greco in Richboro, PA

>Jennifer,

It's great having Bill live so close by. I was also thinking how cool it would be to have you, Mark Kauder, Joel Hunnicutt, Tommy Skaggs, Jim Shaver, Chico, Sophie, David Propst, and the rest of the gang live close enough to have a tree "Harvesting Party". Now that would be one hell of a party!

Maybe I can set a medium sized piece aside for you just in case you make it to Bill's (yet to be scheduled) BBQ this year. :>)

See ya around,

Dominic

Re: Ambrosa maple anyone?

#8

Re: Ambrosa maple anyone?

Ned Bulken

>Oh man I just love ambrosia Maple. Would love some of that, how about a trade, I've got a couple of logs in my storage unit that might be worth swapping.

Re: Ambrosa maple anyone?

#9

Re: Ambrosa maple anyone?

Mike Cunningham (cape May)

>The two blanks that I sent to you a year and a half ago came from the same area. The beetles must like SE Pa!

Re: Ambrosa maple anyone?

#10

Re: Already set some aside

Bill Grumbine (Kutztown PA)

>We did that stuff already! Two truckfuls of cherry up a steep hill, and this stuff wasn't your ordinary dog doot by a long shot. This dog was the size of a small horse, and the owner was semi-invalid, so no one ever scooped the yard, and it was FULL. You've seen the Olymipcs with the downhill slalom, right? Well this was the UPhill slalom, with chunks of cherry weighing in at 500-600 lbs a piece on a hand truck, about 250 feet from our trucks. We had to zig zag around the "obstacles" all the while trying to keep the log from rolling off the hand truck and landing on a "landmine". To say that we were "pooped" by the end of the day would have been an understatement.

I'll never forget the look on Dominic's face when we finally got the tree sectioned and into the grass from the woods. We rested for a few minutes, and then I said, "Now comes the hard part." Dom was standing bent over with his hands on his knees - we were both pretty well winded from horsing these huge logs around - and he turns to look at me and says, "What do you mean the HARD part?!?

But that was some cherry tree, wasn't it? Several people here got some of that. In fact, I was over to see Ellis a couple of weeks ago and he showed me a salad bowl he made from a chunk of that tree.

We're old and feeble now, so we use stuff like lifts to move the big stuff. ;-)

Bill

Re: Ambrosa maple anyone?

#11

Re: Already set some aside

Mark Kauder, Phenix City, AL

>I remember the photos, and the great story, retold here.

Mark

Re: Ambrosa maple anyone?

#12

Steven Antonucci

I'm at Ellsworth's in three weeks (repeat GLOAT!)

steve antonucci

>and I'd probably take some off of your hands if you still have it.

Send me an e-mail and I'll work out a great trade with you.

Steve

Re: Ambrosa maple anyone?

#13

Re: Ambrosa maple anyone?

Jennifer@Indy.USA

>Mike, those blanks were awesome!One became a natural edge bowl and the other is still unturned.

:)

Re: Ambrosa maple anyone?

#14

Re: Yeah, me too!

Jennifer@Indy.USA

>Uh, Dom.....I know you've been busy....but I do beleive that party has already been scheduled....for a while now :)

But we wouldn't have let it go by without telling you!

:)

Re: Ambrosa maple anyone?

#15

Re: Ambrosa maple anyone?

Jim K in Trappe PA

>Hi Dominic,

What a generous offer!

I'd love a few chunks, but I don't think I can get over there until next Sunday (May 14). I'll send you an email later next week to see if any is left.

Also, I'm sure I could not lift a two foot long 30 inch diameter chunk, let alone a four foot log. Is there any problem with me splitting it into smaller pieces (es: take a four foot section, cut it in half, and then split the two halfs)?

Thanks!

Jim K in Trappe, PA

Re: Ambrosa maple anyone?

#16

May 14 = Mother's Day!

Dominic Greco in Richboro, PA

>Jim,

Unless I want my wife seriously mad at me, I'd say we wait until later in the month! I don't think she'd understand my preference to hanging out and talking about wood turning over celebrating her first "official" Mother's Day! :>) Plus the week after that is our daughter's Christening. So we'll have to choose our days carefully. We'll talk off line and zero in on a more appropriate window for this. OK?

I have no problem with you splitting one the big sections down the middle. It's much easier to transport and allows me to give the other section away easier. Just a warning, these logs are HUGE. My 18" Homelite won't make a dent in them. Hopefully before you get there I will have them split.

See ya around,

Dominic

Re: Ambrosa maple anyone?

#17

Email bounced back!

Dominic Greco in Richboro, PA

>Steve,

My email to you bounced back at me. Email me and we'll make some arrangements to get you some Ambrosia Maple.

Later,

Dominic

Re: Ambrosa maple anyone?

#18

Re: Already set some aside

tek-Brunswick, Ohio

>Of course my answer was tongue in cheek. That�s an excellent story though and probably better over a few beers. Easier is better. It's hard to turn wood if you wrecked your back getting it from the tree to the lathe. I spent over 30 years in construction, where you learn to take care in how you lift and move things. I've seen to many guys play macho man and they ended up hurting themselves. BTW when is the five barns gathering?

Re: Ambrosa maple anyone?

#19

Re: Ambrosa maple anyone?

Ned Bulken

>Dom,

I have a nice sized hunk of Box elder which I could part with, that sound fair? Approximately 8+ inches across and about one to two feet in length

Re: Ambrosa maple anyone?

#20

Already got a ton!

Dominic Greco in Richboro, PA

>Ned,

A couple of years back I stumbled across a huge Box Elder with some of the most spectacular coloring I've ever seen. I still have some on my wood pile.

Don't worry about trading. I have waaay too much of this ambrosia maple. I need to get rid of it! I tried to move one of the big logs this weekend (31" dia x 5' long). Pushing with all my might didn't budge it. And I have about 4 of these! Think I have enough to go around? :>)

Thanks anyway.

See ya around,

Dominic

Re: Ambrosa maple anyone?

#21

Re: Ambrosa maple anyone?

Ricco G

>Hi Dom

I read your offer about the maple for the taking,is it still available? I just got into turning andI live in Norristown, I know where Richboro is. I just joined Keystone Wood Turners and am going to join Bucks Turners in June. Thanks Rick

Re: Ambrosa maple anyone?

#22

Re: Ambrosa maple anyone?

Wayne Leach-NW Ontario

>I sure wish I lived closer!!! All I have here is poplar, birch and black ash. I am drooling over your prize and from what I have seen in photos here at WC, this wood is "drop dead gorgeous".

Regards,

Waayne