Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Curly Cottonwood Wide Brim Bowl

Posts

Curly Cottonwood Wide Brim Bowl

#1

Curly Cottonwood Wide Brim Bowl

Jennifer@Indy.USA

>Hi Gang,

Here's a couple of new things from my shop. This first one is a piece of figured Cottonwood. Our own Jim Shaver gave it to me a while back (thank you Jim :), and I just got around to turning it a week or so ago. This blank was odd because I could see that one side was incredibly figured all over, but the other side was plain Jane...nothing happening on it. I wanted to get the most of the figure but I wasn't sure how deep it went. So I decided I'd try one of these wide rimmed jobbies and leave the blah part of the blank for the base. After I was done turning it....the blah base...was just that...blah, so today I decided to cover it up with some heat from my woodburner.




It's about 10" diameter and 6" tall. I have about 4 coats of BLO on it and I'm not sure what to do with it next. I don't usually use BLO but was using it to wet sand with and so I guess this is the finish that it gets. Do those of you who use BLO buff afterwards? With the Beal? Or just by hand with a soft cloth?

Any comments are welcome. Thanks for looking.

Jen

Re: Curly Cottonwood Wide Brim Bowl

#2

Re: Curly Cottonwood Wide Brim Bowl

Barbara Gill, Remlik VA

>Nice Jen. Cottonwood has incredible figure and you did a good job of showing it off. How did it burn?

Re: Curly Cottonwood Wide Brim Bowl

#3

Brad Vietje

Re: Curly Cottonwood Wide Brim Bowl

Brad Vietje

>REALLY Beautiful, Jen -- very fine work !

Brad Vietje

Newbury, VT

Re: Curly Cottonwood Wide Brim Bowl

#4

Re: Curly Cottonwood Wide Brim Bowl

Curtis TX

>I really like it. It's one of those turnings I just want to pick up to examine and feel the texture.

Curtis

Re: Curly Cottonwood Wide Brim Bowl

#5

Re: Curly Cottonwood Wide Brim Bowl

Ed Kelle

>Very cool Jen, I really like the shape. That sure is fantastic grain on top. Last night I finished a piece that has almost the same texturing as the bottom, it definitely makes you want to touch the work.

Great job

Re: Curly Cottonwood Wide Brim Bowl

#6

Brad Vietje

I just HAD to look again !

Brad Vietje

>

Re: Curly Cottonwood Wide Brim Bowl

#7

10 - Exceptional!!!

Harvey Meyer in Atlanta

>I'm holding up a sign with a BIG "10" on it. This is a masterpiece.

Harvey

Re: Curly Cottonwood Wide Brim Bowl

#8

Re: Curly Cottonwood Wide Brim Bowl

Gil Jones on Lake Seminole GA.

>Exceptional work, I really like it!, and a great looking piece of Cottonwood.

Is the lower part done with a rotary wire brush? Cool effect.

Re: Curly Cottonwood Wide Brim Bowl

#9

Re: Curly Cottonwood Wide Brim Bowl

Carole Valentine

>Certainly an unusual shape (at least to me anyway) and I like it. I have had wood that presented the same type of all or nothing figure distribution but never thought of treating it like this! Could we have pic looking straight down on this piece, Jen?

Re: Curly Cottonwood Wide Brim Bowl

#10

Ditto all. Your shop is now a studio, period!

Eddie Pacheco, San Jose, Ca.

>

Re: Curly Cottonwood Wide Brim Bowl

#11

Thanks All!

Jennifer@Indy.USA

>Thanks everybody...you're all so kind. To answer a couple of questions. The color and texture on the bottom were achieved with just a burning pen. The tip used is called a Hair Pen. I think serious woodburners use it for creating fur and hair. Carole, this piece went with a box of others to the new store that's opening up next Wednesday here in Indy. I had to have my stuff over there today,so I dont' think I have an shots from directly overhead. I'll look at the ones that I took. I think I may have one that's a bit more overhead, but none were taken off the tripod so none would be from directly over it.

Thanks again for all of your very kind comments :)

Jennifer

Re: Curly Cottonwood Wide Brim Bowl

#12

Re: Thanks All!

Jim Shaver Oakville, Ont. (In Phoenix!)

>Hi Jenny,

There are a few things I really like in this one, the wide brim, the textured surface, but I am having a hard time with them together...just me, I am also thinking scale and design of the brim vs the burning in the bowl...they seem at odds with me...

:-)

You know me...just telling you what I think...it's got a lot going for it, just wondering if you considered other options in this design?

Take care,

Jim

Re: Curly Cottonwood Wide Brim Bowl

#13

Re: Thanks All!

Jennifer@Indy.USA

>Jim, you know what..I'm glad you told me exactly what you think of this one. It means a lot to me. I did have a few stumbling blocks with this piece. As you know the blank was a "10" on one side and about a "2 on the other. This design was something I'm sure I've seen before but had never messed around with. It's definitly not one of my favorite designs. I can see where one might have trouble digesting both the natural, wide simple, smootheness of the brim...along with the textured, dark completely opposite nature of the bottom. They do collide where they come together, but I tried to alleviate some of that clash with the lip between them where the base meets the brim.It might have been nice If I had put a shallow curve to the brim instead of making it so flat. I'm not sure if I would have had enough material or if the underneath side of the brim would have lost it's figure? It would help in being able to see the bottom portion better if there was some lift to the brim now that I think about it. Anyway....I do appreciate your thoughts. If and when it sells....I'll take you to dinner next time I see you! How bout Louisville? Friday night...the banquet...you've already got your ticket right? Ha! I'm SO bad!

Deal!

Jen :)