Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

redwood lamp

Posts

redwood lamp

#1

redwood lamp

john lucas

>This will have to do for a photo of this lamp. I have to get it to the local PBS station for thier auction. I make these out of old ballisters that were ripped off the old dorms on our campus. I have to remove the old paint and re-turn the ballisters to true them up. I bore a hole using a lamp auger, then I add my own details so it becomes a Lucas piece. In this case I textured it with the Sorby texturing tool and filled the details with brown shoe polish. Then I seal it with shellac and spray with lacquer.

The base was painted black and sprayed with lacquer. The two brands aren't compatible so they crackle really nicely. I love the effect. I sprayed more layers of lacquer over the whole thing and then steel wooled it and waxed it with Johnsons paste wax.

I include a photo of the building that it comes from with the lamp.


img

Re: redwood lamp

#2

Re: redwood lamp

Jim Shaver Oakville, Ont.

>Hi John,

That is a great way to salavge history, very nice looking lamp too!!

Take care,

Jim

Re: redwood lamp

#3

Re: redwood lamp

john lucas

>Jim I just looked at it more closely. I'm going to have to get a shorter harp the lampshade should go down a little further according to my lamp expert. I guess I'll have to run and get another one tomorrow during lunch.