Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Southern States Symposium

Posts

Southern States Symposium

#1

Southern States Symposium

john lucas

>Did anyone get to go to the Southern States Symposium? I had to shoot a banquet, a whole day of shooting glass and jewelry and then 2 performances of a play. I did finally get to play in the shop today and a little bit yesterday morning. I finished a lamp that I'll try to shoot tomorrow. I'm still working on a complicated box and I finished the modifications to my sliding table saw miter jig. I cut a 36 sided segment test ring and it fits perfectly. Now I'm ready to move on to the real project.

Here's a photo of the miter jig. The left side is the miter gauge with a fine adjuster. I have installed brass pins that allow me to measure the distance with a dial caliper so I can exacly reproduce the angle again, I hope. The right side has an adjustable stop block. The angle and the distance are adjustable.


img

Re: Southern States Symposium

#2

Re: Southern States Symposium

john lucas

>This is the micro adjuster. I also have a Zero block so I can set it back to 0 everytime I need that option.


img

Re: Southern States Symposium

#3

duplicating setup

john lucas

>Here I am measuring the distance between the pins. This will allow me to duplicate any settings. In Theory I can talk my son into doing the math for any angle (I'm math iliterate) then I can set the guage using my Dial caliper. I figure since it's all homemade this probably won't be accurate enough but once I've done a test to arive at the exact angle I can then measure the distance and add it to my notebook.


img

Re: Southern States Symposium

#4

Re: duplicating setup

Ron in Drums PA

>Nice Setup John

Re: Southern States Symposium

#5

Re: duplicating setup

Lan Brady

>John,

I went too TD's on Tuesday and moved to SSVI on Friday. Just got home as a matter of fact. Both events were great. Would not trade either experience for anything!

Lan

Re: Southern States Symposium

#6

Re: Southern States Symposium

stacey s

>YesI went and had a great time. I met several other people from Woodcentral and saw some excellent demonstrations. It was my second year and I can't wait to go back next year.

Stacey

Re: Southern States Symposium

#7

Re: duplicating setup

George Van in WI

>Thanks for posting John, this is just the thing I need to put on my cut-off sled. For flatwork I have been fighting with shims to get an angle by the cut and check method. This will speed things up and make things easier to duplicate.

Re: Southern States Symposium

#8

Yes - and a gloat

Roger Smith

>John, I attended and set in on several good demos. I also walked out with one of the 10 scholarships to John C. Campbell. At least one other WC regular won one of the scholarships.

Re: Southern States Symposium

#9

Re: Yes - and a gloat

Mac

>Yup Roger,That other one happened to be ME!!!!!

Re: Southern States Symposium

#10

Congrats to both of you!

Carole Valentine

>

Re: Southern States Symposium

#11

Oh, BTW Mac...

Carole Valentine

>I know you really don't want to drive all the way back south to Campbell do you??? Why don't you just change the name on that scholarship and send it to me? :))