Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

New piece...

Posts

New piece...

#1

New piece...

Chris Wright

>Here's a little something I did yesterday for fun. African Blackwood goblet with a nice section of sapwood. About 6" tall, 4" stem that is 1/8" dia. (each bead marks an inch). Captive ring. I tried to get a little more elegant with the base, so I have a ball trapped between 2 half coves. The bowl is 1/16" thick. The light line about 1/2 down the bowl is not a tool/sanding mark...had to double check after seeing the photo, fortunately it is just dust. I'm getting addicted to turning these things...


img

Re: New piece...

#2

Re: New piece...

RevDoug

>Chris, did you get that new captive ring tool at Woodcraft? This goblet is beautiful. Very nice piece of work. I'm understanding your addiction to the goblet form. They are a ton of fun to turn. And to get the stem to 1/8" with out loosing it, well let's just sat that the pucker factor keeps getting higher. Very nice piece.

Turn 'em round,

Re: New piece...

#3

Re: New piece...

Jake Niedling

>Nice turning and design, well done. Can you tell us how you keep it all together with such a thin, long stem. Do you use any support?

Re: New piece...

#4

Re: New piece...

Chris Wright

>Thanks Rev...actually after doing a number at 1/8" (and wanting to go thinner) the pucker factor is all but nil now. Haven't gotten a ring tool yet, they smallest they had was 1/4". Still using a spindle gouge and a homemage tool.

Thanks Jake, this is actually one of the shorter ones I have done lately. I believe it's number 10 at this thin and the tallest one so far is 8 1/2" (6 of which was stem 1/8"). I don't use any support up to this point, haven't needed to. I use a technique I learned years back from Stuart Batty where the bowl is turned first and then the tailstock (or a turned plug) is fit into the bowl and then masking tape them together. Once taped, I back the tailstock off just a hair and the resulting tension helps eliminate a huge portion of the whip.

Re: New piece...

#5

Re: New piece...

john lucas

>I tried that technique once but I didn't have a variable speed lathe. I turned the lathe off to inspect the piece and when I turned it back it ripped the thin spindle apart. I've always wanted to see what would happen if you could drive the tail center from a gear drive to the headstock. That way you could easily put tension on a thin spindle without worrying about the forces need to drive the tailcenter.

Re: New piece...

#6

Very nice!

Jennifer@Indy.USA

>Hey! That's nice Chris. I don't know how you guys do those....vewwwy carefuly apparently :)

Beautiful job!

Jennifer

Re: New piece...

#7

Re: New piece...

john lucas

>chris I forgot to tell you how nice I think your goblet is. You worked with the wood well and I like the shape of the bowl.

Re: New piece...

#8

Re: New piece...

Jerry Whitaker

>I saw a goblet turned by Joe Millsap from Oklahoma that had a stem that was 4 feet long and 1/8in. diameter. This is the same guy that did a demo for our club one time and reached up on the wall, grabbed a hatchet and turned with it for awhile. He was finishing up a small hat, stopped the lathe to take a look and said it was a little thick in one area. As soon as he touched the tool to it, it flew in a million pieces. He never flinched, looked up or said anything but kept on turning. When he was through with his "coaster", he said, "You guys thought I was turning a hat .... didn't you"?

Re: New piece...

#9

Re: New piece...

Mike Rubes, Apex, NC

>Hi Chris,

Very nice!! That's a really delicate form. I love the blackwood contrast between heart and sap. I've turned a little and really like it. Great stuff, takes a wonderful shine.

I like how you got sap/heart wood in the captive ring as well, nicely done.

Thanks for the pics.

Mike

Re: New piece...

#10

Re: New piece...

Chris Wright

>Thanks everyone, these are very addictive because as soon as you turn one you immediately want to see how thin and/or how long you can go.

John, as far as the stem trick you did, I did that one my first one before realizing the tailstock has more grab as it slows down. Oops! ;)