Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Salad Bowl Finish Question

Posts

Salad Bowl Finish Question

#1

Salad Bowl Finish Question

Barry Irby

>What makes the best finish for a "working" salad bowl? I have seen posts about Mineral Oil. I tried some Salad Bowl Finish that came in a can from Woodcraft, but it appears to be varnish to me. I have a Beal Buffing system. Can I Apply oil and then buff it with Carnuba? Whats your favorite?

Re: Salad Bowl Finish Question

#2

Re: Salad Bowl Finish Question

Barbara Gill, Remlik VA

>Barry, I use several coats of a penetrating oil finish. After it cures, I buff it. On the back of my card I include directions for care which includes using either a light wipe of mineral oil or my favorite Claphams beeswax/mineral oil combination to keep it looking good.

Re: Salad Bowl Finish Question

#3

JL

Re: Salad Bowl Finish Question

JL

>I like mineral oil and bees wax. Put some mineral oil in a double boiler (buy your own, don't use the good one). Heat gently and shave bees wax into it until it won't take anymore without gelling. Add a touch more mineral oil. When it cools, you'll get something the consistency of a soft margarine. It rubs in nicely (at least for cutting boards and the few bowls I've tried). Non toxic and renewable.

Re: Salad Bowl Finish Question

#4

Re: Salad Bowl Finish Question *LINK*

Sean Troy

>The easiest and least expensive that works very well is Mahoney's Walnut Oil. 1 or 2 wipe on coats and your good to go. Craft Supplies and Woodcraft carry it. Or you can get it directly from Mike himself.


http://www.bowlmakerinc.com

Re: Salad Bowl Finish Question

#5

Re: Salad Bowl Finish Question *LINK*

georgetroy

>Use Preserve Master Blend you can order from Klingspor. Safe for food and you can use immediately. It's what I use for salad bowls. GT


Salad Bowl finish

Re: Salad Bowl Finish Question

#6

Re: Salad Bowl Finish Question

Rick Davenport

>I like Mahoney's walnut oil too.

Plus he has a walnut oil/beeswax/carnuba blend that's nice as a final finish.

Rick

Re: Salad Bowl Finish Question

#7

Re: Salad Bowl Finish Question

Greg H. from Wisconsin

>I second that comment on Mahoney's Oil. That's what I like to use. The bottom line though-"once CURED most anything is food safe." I like to use Mike's because it is easy, fast, and when I sell a bowl I never have to worry about a customer burning down their house trying to recoat with Watco or a fast drying oil finish with oily rags. No fear of that with Mike's. My second choice is the Mineral Oil/beeswax mix.

Hope it helps

Greg