Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Question w/gloat...or vise versa

Posts

Question w/gloat...or vise versa

#1

Question w/gloat...or vise versa

Jack Savona

>Question: Is this pattern in ambrosia maple normal?

Gloat: I saw some small, cut ambrosia logs in front of a house being constructed. Not knowing for sure what they were, I asked for a few. Request granted. I returned a month later with an end grain bowl showing off this starburst pattern. The carpenter, also an occasional turner, marveled at the pattern. As planned, I gave him the bowl.

I then commented that there were two eight foot sections of the same wood sitting out front. "Sure would be a shame to burn 'em", I noted.

"Ayuh.", he replied. "Wannem?"

No need to tell you my reply.

Never having actually seen ambrosia maple, my question again: Is this starburst pattern the norm or were these celestial beetles?


img

Re: Question w/gloat...or vise versa

#2

Re: Question w/gloat...or vise versa

Doug Trembath

>Well, Jack, there's no rhyme nor reason behind the paths bugs take, but I have seen a tree like this. I removed one from my MIL's yard five or six years ago while we were out here on vacation, and I made some terrific hollow vessels out of sections we boxed up and took back to California on the airplane. My wife had to come back the next week for work, and boxed up a bunch more and brought it back with her. Great news for you, end grain is wonderful with the star pattern. Enjoy it, and if you can, share the wealth with someone else!

Doug Trembath

Studio in the Woods

Re: Question w/gloat...or vise versa

#3

Re: Question w/gloat...or vise versa

Jack Savona

>I have already shared with other turners who have been kind enough to share their bounty with me and look forward to doing the same with even more. It's so nice, after these years, to be able to reciprocate.

For all of you who wonder where to get good green wood: be patient and continue to LOOK and make connections with "tree" people. It WILL eventually pay off.

Re: Question w/gloat...or vise versa

#4

Try a pith centered bowl

Dominic Greco in Richboro PA

>Jack,

Nice catch on the Ambrosia Maple! DId you ever think of trying to turn a pith centered bowl? That spalt pattern would look really nice centered ina bowl. I tried that once with some Box Elder and it really worked well. I've attached a pitcure of one of them to this post.

Just cut a nice chunk off the end of the log. Turn it to a cylinder between centers and form a tenon on one end. Dough out your bowl shape and then use a chuck to hold the roughed out bowl by the tenon. Hollow to about 10%.

Now comes the messy part. Soak it overnight in a solution of 50% dishwashing soap, 50% water. The next day allow it to drip off and turn it to final thickness. Be sure to soak the pith in CA glue.

Sand and apply a finish.

Good luck,

Dominic


img

Re: Question w/gloat...or vise versa

#5

Steven Antonucci

Sweet Wood!

steve antonucci

>How big is the log? I'd turn some hollowforms endgrain if it was mine... unless it was real big, then I'd split the pith and go bowls with the bottom in the center of the log.

Steve

Re: Question w/gloat...or vise versa

#6

It was an end grain bowl...

Jack Savona

>...with that starburst pattern coming up from the middle that made the carpenter say the "Wow!" that got me the rest of the wood. He kept showing his co-workers the bowl, saying, "I've never seen wood like this. It's golden."

And that's what prompted the question: Is this a common ambrosia pattern? I guess not.

Unfortunately, the logs had been sitting on the house lot for a while and many of the pieces I cut from it have some checking around the pith. They were Anchorsealed as soon as I took the photo, but I'll have to deal with several pith cracks in future bowls. However, the final, unique look should easily distract anyone's eye from any minor CA repair.

Steve, the logs range from 12-14" diameter.