Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Okay Jim Shaver, here ya go!

Posts

Okay Jim Shaver, here ya go!

#1

Okay Jim Shaver, here ya go!

Mike Hamilton

>Last year I roughed a couple of bowls in the spring. One with supervision/instruction, one all on my own. This spring I was between contracts and scheduled a shop day with Indy's own Jennifer. Turned a piece of firewood (not sopping wet) all the way to finish.

Excuse the crude photography and the single picture posts, I'll get both figured out later.

Regards,

Mike

Here's the top.


img

Re: Okay Jim Shaver, here ya go!

#2

Re: Bottom 

Mike Hamilton

>


img

Re: Okay Jim Shaver, here ya go!

#3

Re: Profile 

Mike Hamilton

>


img

Re: Okay Jim Shaver, here ya go!

#4

Re: Ogee bowl top

Mike Hamilton

>The day at Jen's got me confident enough to try to finish turn the one rough bowl I had done on my own. The roughing had a crudely ogee shape, so I decided to do the same for the finish turning. Very interesting doing the inside!

The top view..


img

Re: Okay Jim Shaver, here ya go!

#5

Wow Mike!!

Jim Shaver Oakville, Ont.

>Hi Mike,

Way to go! It looks like you did a great job on the bowl, nice continous form.

I'm glad to hear you spent some time turning with Jen, she's been teaching lately at Woodcraft as well. I'd say it looks like you learnt well from her!

I still have my first bowl and a few other early ones, but not as nice as this one... Keep it up Mike!

Take care,

Jim

Re: Okay Jim Shaver, here ya go!

#6

Re: Ogee bowl bottom 

Mike Hamilton

>


img

Re: Okay Jim Shaver, here ya go!

#7

Re: Ogee bowl profile 

Mike Hamilton

>


img

Re: Okay Jim Shaver, here ya go!

#8

Re: ash bowl top (and story)

Mike Hamilton

>This is the first bowl I ever roughed out. From a log off our church's lot. Duane Leach helped me with instruction and supervision. It sat until mid-winter when our AAW chapter did a demo and hands-on day at the local Rockler. I took it along with the thought I'd get help with my first finish turning. In the hubbub of the day, lot's of interesting people looked over my shoulder and did a little hands-on. The crowning comment was when our own inimitable Al Crandall says, " That bowl has been worked on by Duane Leach, Jennifer Shirley, Dick Gerard and Betty Scarpino and you still have tearout and uneven walls?" Did I mention there were a lot of distractions?

Last weekend I put it back on the lathe and finished it alone (without distractions). No clue how to finish it. The other two have many coats of seal-coat, knocked off some shine with steel wool then waxed by hand.

Top view


img

Re: Okay Jim Shaver, here ya go!

#9

Re: ash bowl bottom 

Mike Hamilton

>


img

Re: Okay Jim Shaver, here ya go!

#10

Re: ash bowl profile 

Mike Hamilton

>


img

Re: Okay Jim Shaver, here ya go!

#11

Re: Wow Mike!!

Mike Hamilton

>Thanks Jim.

The day at Jen's was a real confidence builder. I know she was planning on me being a curriculum development guinea pig for her one-on-one instruction. I also know she wasn't planning on someone as inexperienced as I am. I must say, she recovered nicely. It was a day well spent for me.

Regards,

Mike (3/31 is a great day, eh?)

Re: Okay Jim Shaver, here ya go!

#12

You Have That Right!

Jim Shaver Oakville, Ont.

>Hi Mike,

Yes indeed March 31 is a good day!!

:-)

The sign of a good teacher is understanding what the student needs and adjusting so that it's a positive experience for the student, Well Done Jen!

take care,

Jim

smiling big for you in Oakville

Re: Okay Jim Shaver, here ya go!

#13

You're on Your way Mike!

Jennifer@Indy.USA

>Mike,

I just discovered this post way down the line...and I just wanted to say nice job on the bowls! You are well on your way Mike. All you need is time in front of the lathe. That's what's going to eventually curb the need to constantly "think" about what your tool is doing, and when that subsides you can start enjoying the process more and more and concentrate on the subject of form and design. I throrouly enjoyed having you over that day. I know it was just as much a confidence builder for me as well so thanks is in order to you as well!

See you at the next meeting!

Jen