Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Bandsaw blade metal?

Posts

Bandsaw blade metal?

#1

Bandsaw blade metal?

Shawn - in ID

>There have been lots of posts on bandsaw blades but mostly on TPI, hook/skip, etc. My question is about blade metal. I just got a Shop Fox 14" with riser and am looking for 105" blades. Lots of options. I can get carbon steel at woodcraftbrands.com for ~$11, silicon steel from Suffolk/Timber Wolf for ~$15 (with current special), or 'Diemaster' M42 bimetal from toolcenter.com for ~$30. Is the bimetal going to stay sharp and last me more than ~three times as long as the others? Thanks in advance!

Re: Bandsaw blade metal?

#2

Re: Bandsaw blade metal?

Brian Hahn in SW Wisconsin

>My personal preference is for the Olson blades from Woodcraft. They appear to be a bi-metal blade and definitely last long enough to justify the additional cost.

Re: Bandsaw blade metal?

#3

Re: Bandsaw blade metal?

robo hippy

>I have had only one carbon steel blade, and a number of bi-metal blades. The bi-metal outlast the carbon steel at least 3 to one. There is a local shop that will make whatever I need. When I went in, I told them I needed blades, and they asked me what I did. I said resaw and cut out bowl blanks. They said bi-metal. I asked about carbide, and they said that those are only for resawing veneers. They do leave a surface that needs almost no touchup.

robo hippy

Re: Bandsaw blade metal?

#4

Re: Bandsaw blade metal?

bob davis

>many,many turners prefer timberwolf