Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

the One-way is up and running...

Posts

the One-way is up and running...

#1

the One-way is up and running...

TDaniel

>Fred and I uncrated the One-way 1640 which will belong to him after our Gathering if he's good. We have been running the lathe since this morning and I have some comments to make about it. It all started with the first phone call to One-way which was a last minute thing; even though they only had 3 weeks to get a lathe here for the Gathering it arrived in time. The crate was superb! This may sound like a little thing to some of you but I consider a good crate to be essential. The lathe arrived without a scratch; not something I can say for several of the other companies. When we took the lathe out of the crate it was ready to go; it already had a plug on the power cord so all we had to do was plug it in and turn it on. Fred's lathe has the optional outboard bed but without that this lathe is about $700 more than a PM3520; the banjo alone is worth the difference. After using this lathe and comparing it to the PM3520 that our club owns there is no way that I could recommend to anyone to buy the PM over this lathe. What a machine for the bucks this is!

And I was not paid one cent to say this.

TD

Re: the One-way is up and running...

#2

Re: the One-way is up and running...

Curtis TX

>TD thanks for the comments. I have my eye on this model but I am forcing myself to stick to my mini for another 6 months. I need to earn my stripes.

Curtis

Re: the One-way is up and running...

#3

See, I Told You

Barbara Gill, Remlik VA

>that the Oneway 1640 was an awesome lathe. :-)

Re: the One-way is up and running...

#4

JL

Re: what about the 3520B?

JL

>

Re: the One-way is up and running...

#5

Re: what about the 3520B?

TDaniel

>No comparison. I don't want to be negative about the PM3520 because it is a lot of lathe for the money; however......for not a whole lot more money the One-way is a whole lot more lathe. Compare for your self before buying.

Re: the One-way is up and running...

#6

If nothing else...

Peter Teubel

>Get a Oneway banjo/toolrest for whatever lathe you have. I used to have the 1224 banjo on my Jet 1236 and the 1640 banjo on my Nova DVR. Believe me, they make a HUGE difference.

Re: the One-way is up and running...

#7

Just did that for my Vic VL300

TDaniel

>I got tired of the toolrest moving on my VL300 so I ordered a complete banjo and toolrest from One-way to correct the problem. With little effort the new banjo and toolrest stays where I put it. I also ordered one for a club member's PM4224. I have to contact One-way tomorrow for longer mounting studs for these two lathe because the bed ways or too thick and the nut won't go on far enough for the nylok to reach the threads but this will be worked out soon I am sure. To me the most used part of a lathe is the banjo and toolrest and I feel it should be designed to handle the needs but only One-way and VB have a good locking mechanism for these.

Re: the One-way is up and running...

#8

Re: what about the 3520B?

Chris K in MD

>I prefer the PM3520, over a Oneway for the sliding headstock.