Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Newbie turner

Posts

Newbie turner

#1

Newbie turner

Jim-IL

>I'm a novice at woodturning. I have an old shopsmith with a lathe as one of its features, and I would like to try a bowl. I need to purchase a bowl gouge, I guess. What size should i buy? Also I don't need a real costly tool as I am in my 70's and it doesn't have to last forever. Any tips you can give me would be much appreciated. I was cutting some trees today, among them A 12" elm and a 12" box elder. Is this wood suitable material? Thanks for your input.

Re: Newbie turner

#2

JL

Re: Box elder is good, don't know how elm

JL

>turns as a bowl.

Re: Newbie turner

#3

Re: Newbie turner

Russell L. Babbitt Jr.

>1/2 or 3/8 are the suggested sizes for starters. I would suggest a 3/8 with a fingernail grind if you only have one bowl gouge. I won't even get into suggesting brands as I prefer quality brand name tools that many others think are too expensive. My bowl gouges start at about $60 and go up from there. All depends on you budget. The woods you mention are great woods to use. Have fun.

Re: Newbie turner

#4

Re: Newbie turner

John Veerkamp

>Both Elm and Box Elder are great woods to turn. They are definitely worth keeping. A 3/8 bowl gauge is a good beginners tool. It is small enough to control and big enough to feel like you can turn something of reasonable size.

Welcome to the world of no return!!!

John

Re: Newbie turner

#5

Re: Newbie turner

Jennifer@Indy.USA

>Hi Jim,

Both Box Elder and Elm are really nice for turning. At least I think so. As far as a gouge goes I really like a 3/8" bowl gouge as my "all purpose" size gouge. It fits a lot of duties. The new line of Pinnacle tools from Woodcraft is pretty nice and they are reasonably priced. If you have a Harbor Freight near you that might be an option for an even lesser priced gouge. I bought a small sized set of High Speed Steel tools for the crazy price of $12.00 if I recall. They were surprising adequate and have served their purpose.

Keep us posted on your turning!

Jennifer

Re: Newbie turner

#6

Re: Newbie turner

john lucas

>Jim I also like a 3/8" bowl gouge. I like the Packard Artisan brand for an inexpensive bowl gouge. I also have Robert Sorby and Henry Taylor gouges. Pretty good for the price.

I like box elder and elm although the Elm will move more. I hope your not planning on turning the whole 12 inch log. cut it in half and turn your bowl without the pith. You'll have much greater success. The box elder will handle uneven thicknesses but the Elm needs to be turned to an even thickness throughout.

Re: Newbie turner

#7

Re: Newbie turner

Jerry Whitaker

>Jim.....A cheap tool can be more costly than a good tool. A cheap one can cost you much frustration and may even cause you to give up on turning. It is sometimes hard to define "cheap". You will need to spend somewhere in the neighborhood of $50 +or- for a decent bowl gouge unless you find a used one cheaper. And, don't let the "AGE" thing stand in your way. There are a lot of turners out there in their 80's having a good ole time.

Re: Newbie turner

#8

Bob Moffett

Re: Newbie turner

Bob Moffett

>Jim,

I like and use a 3/8" & 1/2" Sorby fingernail grind bowl gouges. If I only had one, I would probably go with the 3/8" to start with. Packard sideground bowl gouges are also good. I would also get the M2 steel rather than the 2030 or 2060 to hold down cost.

I have turned both box elder and ashe and prefer to turn ashe.

If possible, check and see if there is a Woodturning Club in your area and attend some meetings. You will meet a lot of nice people and learn a lot. You might also want to check and see if the local community college has woodturning classes or woodworking classes that include woodturning. Welcome to the world of woodturning.

Re: Newbie turner

#9

Re: Newbie turner

Jake Niedling

>Make sure it is a high speed steel. You will most likely need to re grind the shape of the tool after you get it. An older friend of mine just bought a 3/8" gouge from Pen State and it seems to work ok.

Give it try and let the chips fly.

Re: Newbie turner

#10

Re: Newbie turner

Bob Fawcett

>Jim,

This is the best discussion of tools I have seen.

http://www.woodcentral.com/cgi-bin/readarticle.pl?dir=turning&file=articles_324.shtml

Also, go to woodcraft and look at any of the Robert Sorby videos on turning. These are a great way to learn to turn.

http://www.woodcraft.com/videos.aspx