Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

OIive hollow vessel

Posts

OIive hollow vessel

#1

OIive hollow vessel

Paul in Phoenix, AZ

>I haven't posted any work for a while, so I thought I put up a couple of olive pieces I completed recently. This one is about 7"D x 6"H. The cracks and small voids are filled with coffee grounds and/or ebony dust. This batch of olive was different than most I get around here. It is a lot lighter in color. The finish is General Finishes Seal-a-Cell.

As always, all comments welcome.


img

Re: OIive hollow vessel

#2

Re: OIive hollow vessel

Paul in Phoenix, AZ

>Same tree as the previous photo. I have four more of these to finish up. It's about 6"D x 4"H. This piece has some great burlly figure. It gives it a lot of motion. Finish is Seal-a-Cell. Voids and cracks are filled with coffee grounds and/or ebony dust.

All comments welcome.


img

Re: OIive hollow vessel

#3

Brad Vietje

Re: OIive hollow vessels

Brad Vietje

>Beautiful work, Paul !

I hope there are more posts coming soon...

Safe spinning,

Brad Vietje

Newbury, VT

Re: OIive hollow vessel

#4

Re: OIive hollow vessel

Ron in Drums PA

>Both are really nice Paul

Re: OIive hollow vessel

#5

JL

Re: OIive hollow vessel

JL

>Nice pieces both. Did they crack too badly?

Re: OIive hollow vessel

#6

Oh, My!

Jennifer@Indy.USA

>Wow, Paul.....both of these are stunning! Absolute candy for the eye.

I'm at a loss for words....beautiful, gorgeous, suculent, sexy, delicious....they are just wonderful!

Jen

Re: OIive hollow vessel

#7

Re: Ron in Drums

Mac

>Hi Ron,If we can get hooked up on the net in Ellijay,could we send you some pics of the drunken brawl and you could put them up on a page....like you did for the critiques?Will be some WC hats there I am sure....Mac

Re: OIive hollow vessel

#8

Re: OIive hollow vessel

Paul in Phoenix, AZ

>JL, olive always cracks...at least in Arizona...the trick is to get to dry slow enough to minimize the cracking

Re: OIive hollow vessel

#9

Migmatite

Jim Shaver Oakville, Ont.

>Hi Paul,

This looks great...I mean the form is a given, but the grain and the infills remind me of looking at migmatites (rock), and evaluating cross cutting relationships...the coffee (ultamafics) gives such a neat appearance in that it does not follow the flow of the grain and in my mind looks more naturally occuring......yeah, I like it!

Take care,

Jim

Re: OIive hollow vessel

#10

Keith Tompkins

Re: OIive hollow vessel

Keith Tompkins

>Thanks for posting these pieces Paul....I always enjoy seeing your work. Great stuff!

Re: OIive hollow vessel

#11

Re: OIive hollow vessel

Richk

>what procedure do you use for filling the voids with coffee grounds?

Re: OIive hollow vessel

#12

Re: OIive hollow vessel

Randy G

>Absolutly Stunning. Those are really really great looking. Thanks for sharing them

Re: OIive hollow vessel

#13

Thanks for the nice comments ~ Paul

Paul Porter in Phoenix

>

Re: OIive hollow vessel

#14

Re: OIive hollow vessel

Paul Porter in Phoenix

>Rick - I use used/dried coffee grounds...grind them up real fine...push as much as you can into a crack/void...dribble on thin CA...stand back cuz it will probably smoke a little.