Ernie's Snakewood
Carole Valentine
>By far the most difficult wood I have tried to turn yet!
Knowledge You Can Build On — Est. 1998
Ernie's Snakewood
Carole Valentine
>By far the most difficult wood I have tried to turn yet!
Re: Ernie's Snakewood
Terry Quiram
>My god woman, don't you ever sleep??????? Carole you have been showing us some very nice work. Thanks for the inspiration.
Terry
Re: Ernie's Snakewood
Allen Neighbors
>Gorgeous wood...and gorgeous bowl. What made it so difficult to turn? What size is it?
I wonder when you have time to sleep, also. You're turning out pieces faster than I can open the pics. :o)
How can I ever hope to catch up with you, if you don't slow down?
Allen
Maker of fine mulch
Re: Ernie's Snakewood
Chris K in MD
>Carole,
To me it looks like wenge?
Re: Ernie's Snakewood
Carole Valentine
>Looks like that to me too, Chris. But I think it had snakewood written on it. Tonight I found another piece of similar wood that is labeled wenge. Whatever it is, it is splintery and mean to turn, but a good exercise none the less!
Re: Ernie's Snakewood
Chris K in MD
>I am pretty sure its wenge by the looks and description, but I could be wrong. I work with it a bit especially for my layered bowls. The pores are difficult to fill as well.
Re: Ernie's Snakewood
Molly Winton
>Looks like wenge to me too, and it fits the description you give. It's very brittle and chips out horribly. I've never turned snakewood, so don't have any reference regarding it's turning qualities. You're doing really nice work Carole.
Re: Ernie's Snakewood
Stephen Mushinski
>I think the others have the wood right. Now snakewood will turn something like turning cement. The snakewood I have is do hard I wouldn't even turn the grinder off while turning the stuff. You might like wenge after snakewood.
Re: Ernie's Snakewood
William Duffield, on the Cohansey
>What you have sounds like wenge to me, too. It's nothing like the snakewood I've turned. The snakewood doesn't always have the typical mottled patterns, but if not, it doesn't have any stripes. Unlike wenge, it is very pleasant and civilized to turn.
OK, Here's my plan.....
Barry Irby
>I have a chainsaw and access to lots of wood. I'm not nearly as skillful a turner as you are and don't have your "eye". You have trouble with the wood gathering side. I will send my wood to you, you turn it and send it back. Everyone's a winner and happy.
Great looking stuff you've been doing lately.
Re: Ernie's Snakewood
Brad Vietje
>Not only does it look like Wenge (which I call "Harpoon Wood" due to the HORRIBLE barbed splinters it seems to cast about the room), but there aren't many people giving Snakewood away...
The Snakewood I've used is incredibly dense (won't float), very fine grained, beautifully figured (looks like snake skin in the right plane) and probably the most expensive wood in the world, often around $100.00 per pound in pieces big enough to turn. It turns very well, and polishes to an incredible finish. Its also a small tree, so a piece roughly 5 x 5 x 2 would be quite unusual, and would probably cost ~ $150.00. I saw a little hollow form Debie Welling made from it a few years ago, 3-1/2 x 3-1/2 x 10", and the blank (18"long!) was the largest flawless piece of high quality Snakewood ever sold. I can only guess what that baby cost... Her album is stull up on WoW's.
As for Carole's bowl, whatever it is, I agree with everyone that it's a very pretty little bowl !
Safe Spinning,
Brad Vietje
Newbury, VT
Re: OK, Here's my plan.....
Carole Valentine
>Um...I have to send ALL of it back after it's turned??? What a deal! LOL BTW...did Dick ever turn any of that wood you brought to his house when I was there? I didn't take any of it and was curious about what it looked like finished.