Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Burned and Colored Platter PICS

Posts

Burned and Colored Platter PICS

#1

Burned and Colored Platter PICS

Mike Rubes, Apex, NC

>Hi all,

I think I am getting a better grip on the burner. This one turned out well enough to post a pic of and get some critiques. From my view, the image is actually a little small for the plate. I think there is too much open space in the platter. Second, I am having troubles burning a nice long continuous curve (or line). I think if I turned the burner down and used a lighter touch to initially score the line, I could then come back and try to darken it? What do you experienced burners think? I am using a fairly heavy hand at times and I think the tip gets in a "groove" and wants to follow it's own path. The tip is fairly sharp, it definitely cuts the wood a bit.

Anyway, any and all comments welcome. The flowers are hopefully recognizable as daffodils. Wood is (very hard) maple. Bowl is about 9.5 across and 2 high. Finish is tried and true varnish and then a light buffing. Colors are from Prisma color markers.

Thanks for taking a look,

Mike


Top shot





Detail shot of the flowers







Profile shot





Re: Burned and Colored Platter PICS

#2

JL

Re: Nice bowl/platter

JL

>My only critique is that I would want a little more "intensity" on the colors of the daffodil flowers and leaves. Just a little more color so to speak. I haven't ever used the Prismacolor markers, so I don't know if this is possible. (My $0.02).

Re: Burned and Colored Platter PICS

#3

Re: Burned and Colored Platter PICS

Jennifer@Indy.USA

>Mike,

I think this a very sweet looking platter. Your burning looks good from here. I know what you mean though about the tip getting in a grove and finding it's own path. Mine do that too. I think with practice using different temps and keeping our tips sharp we'll finally figure it out...the hard part is that I'm sure the setting is different for each type of wood. I usually don't have a scrap piece left over to practice on. So what I've been doing is while the piece is still in rough turned form....I'll put a burn tip to it to see how the wood is reacting to the heat...change it a few time till I get something I like, make a note of it and then finish turning. Unfortunately sometimes I don't decide to burn a piece until it's off the lathe!

Anyway, I really like this platter. I like the detail around the rim and I really don't think that it looks too bare in the middle. I remember my grandmother use to collect antique serving platters and China and sometimes they would have a simple single painted flower or herb painted in the center and nothing else to detract from it. That was the focal point, much like yours here. It's lovely!

Nice job.

Jen

Re: Burned and Colored Platter PICS

#4

Re: Burned and Colored Platter PICS

Mac

>Hi Mike,Scoring a light line first will help...

Re: Burned and Colored Platter PICS

#5

Re: Burned and Colored Platter PICS

Shane Ferrell

>Great looking burning. I like the flower. Only suggestion, is if the flower could have come from the "open" spot in the grain about 1" above the base of the flower, it would look like the flower was growing out of the grain. This would be very hard to plan with a rough bowl.

Shane - sticking with the basics

Re: Burned and Colored Platter PICS

#6

Keith Tompkins

Re: Burned and Colored Platter PICS

Keith Tompkins

>Hi MIke, this is nice! Very nice form, my only comment would be: If you colored or textured the area in the rim it would tie the piece together. Possibly "woven"leaves or a green textured surface. Also, the same thing could be done to the bottom with great effect. thanks for sharing!

Re: Burned and Colored Platter PICS

#7

Re: Burned and Colored Platter PICS

Carole Valentine

>Hi Mike. Very nice platter. I love the daffy. I don't think it is too small, I just think you should do a litle more with the rim to balance it. Either a burned, colored pattern or a texture. Just my thoughts.