Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

One Hidious Picture

Posts

One Hidious Picture

#1

One Hidious Picture

Eddie Pacheco, San Jose, Ca.

>This is what hidious is, Jennifer.

Decided to practice some turning today and I had the cherry block that I had used for some small platter stock. I decided to ue as is and create some kind of oddball winged piece. (hey, these spinning wings are scary, by the way) To me everything was going great and I was at a wall thickness of 1/4" on the plus side. I was using the Scorpion with the round disk to do some clean up. It was working great, even though I was laying over my small lathe to perform the cut. I decided to look into the wall opposite the cutting

the cutting side when I forgot to remove the tool and I canted it over and got a nasty catch and things were flying. It was fast and it was brutal. I'm really ticked right now. And to top it off the quick picture I took looks like crap too. (small flourscent light with camera flash, blue paper background)

I think I can recover this with a different oddball shape.

See ya.


img

Re: One Hidious Picture

#2

There's a word......

Rick Davenport

>for when things like that happen.

I didn't coin the term, but it works well in this and other instances.

PISSENING

Rick

ps: good luck with the "design opportunity."

Re: One Hidious Picture

#3

Re: There's a word......

Eddie Pacheco; San Jose, Ca.

>Hmmm, I didn't try that one and Nancy redirected my efforts when she saw I was headed for a lightning strike with the lingo I already was using.

I did salvage the piece and it came out nice, but this morning our main PC is having some kind of problem and the old PC is breaking up all of the images from the flash card. So...I'm back in lightning strike territory again.