Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Gathering Attendees

Posts

Gathering Attendees

#1

JL

Gathering Attendees

JL

>I am going to make one more trip to Highland Hardware.

If you want me to pick up something, either post it here or send me an email. I'll be making the trip on Monday morning probably.

Also, if anyone would like small rolls of film laminates (or even some large ones), let me know. I've got a few stashed in the warehouse that I have to get rid of. These are typically 18-24" wide and up to a couple of thousand feet long. Specify clear or opaque. I use them for protecting the bench and clamps from glue and finishes (think of wax paper - only it's much sturdier). For those who don't want a whole roll, I'll happily unroll some for you at the Gathering.

Re: Gathering Attendees

#2

Re: Gathering Attendees

Carole Valentine

>JL, I can't believe you are doing this for us! What a gem. :) If you could check and see if they have a can of Watco Liquid Finishing Wax (natural) I would be grateful! I am down to half a can and can't get it around here.

Re: Gathering Attendees

#3

PS

Carole Valentine

>If I am the only one, don't worry about it. No need to make a trip just for that. I can include it in my next mail order which probably won't be that far in the future.

Re: Gathering Attendees

#4

JL

Will get it.

JL

>

Re: Gathering Attendees

#5

Re: Gathering Attendees

Gary in Zirconia, NC

>I'd like a roll JL.

Re: Gathering Attendees

#6

JL

Re: OK - large or small?

JL

>I'll bring several so you can have a choice :).

Re: Gathering Attendees

#7

Re: OK - large or small?

Gary Evans Tallassee, TN

>Hi JL,

I'd also like a roll. I have a friend I can split it with, so whichever size you want to bring will be fine. I'll trade you some wood.

Thanks,

Gary

Re: Gathering Attendees

#8

JL

Re: OK, I'll bring one (or more) for you.

JL

>

Re: Gathering Attendees

#9

JL

Re: And if I have a choice..

JL

>I'd like a piece of cherry. If you could get me a log section about 28" long, I'd appreciate it (and even pay). Green is best, a nice straight section if possible. I need to make some spindles.

Re: Gathering Attendees

#10

Re: And if I have a choice..

Gary Evans Tallassee, TN

>You got it, JL.

How many spindles do you need to make? Would one 12"x28" piece be sufficient?

I'm also curious about the reason for green wood. I thought most spindle turners preferred their wood to be dry?

Gary

Talasi Hardwoods

Re: Gathering Attendees

#11

JL

Re: I rive my spindles ....

JL

>we are talking about splitting them out of logs and using drawknives and spokeshaves to get them to round. I only turn legs, stiles and stretchers. These are for the backs of chairs.

Re: Gathering Attendees

#12

Sure sounds like lots of work

Carole Valentine

>Especially when you got a lathe sitting right there waiting! LOL

Re: Gathering Attendees

#13

Re: Sure sounds like lots of work

john lucas

>Carole Riving wood means the grain will run straight through and be stronger. You can turn the spindles if you wish. I rive them and then make them square with the drawknife and then eight sided. Then I'll turn them if I don't just finish them up with the spokeshave. I've got to find time to make some chairs this summer. I need kithen chairs.