We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I have much thanks for the people that helped me to make a box hollow. I followed what was said and did it. Now I have to wonder and so ask why the boxes that my friend makes have lids that are hard to open. He said that he made them a year or more ago and the wood was dry. He said the lids fit just right but now they are tight. Will this be happening with all of the boxes? For this information I thank you with muchness.
>Friction fit box lids do tend to change as the weather does. Humidity affects the wood as it attempts to acclimate. Starting with "dry" wood to begin with is a must.
>Wood will move and a really tight lid will fit really snug part of the year and really loose part of the year. The trick is to know what the humidity is at the time of year you make the box and also have some idea of the wood movement of that species. Also the box size and grain orientation.
If you make an endgrain box the wood will move less in the direction that binds the lid. Then keep the box small, 2" or less for a snug lid. My rule for box lids is small boxes like pill boxes need a snug fit lid. If the box is decorative but small I don't want the customer to pick up the box by the lid and then have the bottom fall off before they get thier hand under it. This style box I make a loose fit lid. For larger boxes of 6" or bigger I make the lid fit over the bottom and leave it loose enough to allow for plenty of wood movement.
by loose fit I don't mean sloppy. It's just not a snug fit. If you want a lid that feels snug but doesn't bind make the lip longer. A longer lip that is perfectly straight will release the air from the inside more slowly and will feel like a suction fit lid but won't have to fit really snug to do so.