Handwheel Jet 1236
Ed Larson
>Has anybody installed a handwheel on a Jet 1236??? It should be easy to do but I can not determing the thread size of the internal thread on the outboard side of the head stock. Does anybody know the thread size????
Ed
Knowledge You Can Build On — Est. 1998
Handwheel Jet 1236
Ed Larson
>Has anybody installed a handwheel on a Jet 1236??? It should be easy to do but I can not determing the thread size of the internal thread on the outboard side of the head stock. Does anybody know the thread size????
Ed
Re: Handwheel Jet 1236
Bruce Wolberg
>I have an old Jet 1236 and the thread on mine is 1/2-13 L.H. I took a short lenght of that rod and drilled it out so I could still use the morse taper knock out (the rod basicly becomes a nipple) and then made a handwheel with the same thread. There is not a lot of wall thickness in this arrangment but it has not broken off yet. Then I shaped the handwheel to hold a bearing for a vacuum system also.
Re: Handwheel Jet 1236
Ron in Drums PA
>Jet sells hand wheels for a 1236.