Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

Professionals or Very Serious Hobbyists!!

Posts

Professionals or Very Serious Hobbyists!!

#1

Professionals or Very Serious Hobbyists!!

Mark Kauder, Phenix City, AL

>I got an email from NASA'a Johnson Space Center. This guy is looking for a woodturner to turn a couple of "Thrusters" (you know, those cone shapes on the bottom of a rocket). I can only assume that they need them for a model (God help us all if they are for a real rocket). Two - they are both 12" in diameter, one is 28" long, and the other is 30" long. They are mostly long tapered cones, with a little combustion chamber in the small end. The specification call for any wood. The big catch is that they need them by 24 April.

If you are serious and interested, email me, and I will forward you the email and the MS Powerpoint slides sent to me.

This guy wants to know leadtime and cost.

Please do not email unless you have the capacity in both lathe, and finding the wood.

Please, no "I just gotta see this" emails.

Mark

Re: Professionals or Very Serious Hobbyists!!

#2

Re: Professionals or Very Serious Hobbyists!!

john lucas

>Mark That's why I quit doing photography for local clients. They only came to me when there wasn't enough time or money to go out of town. So I was supposed to give them an equal product in an impossibly short time for very little money. Wasn't worth it.

Re: Professionals or Very Serious Hobbyists!!

#3

Re: Professionals or Very Serious Hobbyists!!

Bill Grumbine (Kutztown PA)

>Yeah John, but this is NASA we are talking about here. Whoever makes these things could probably charge $10,000 each for them and they would be considered a bargain!

Bill

Re: Professionals or Very Serious Hobbyists!!

#4

Re: Professionals or Very Serious Hobbyists!!

Sean Troy

>I got the same e-mail this morning. HMMMMM ?

Re: Professionals or Very Serious Hobbyists!!

#5

Re: Professionals or Very Serious Hobbyists!!

Bill Hale

>Hey folks don't forget mil spec at .ooo1, 1 ten thousants, Gota believe this.

Probably reject the product and keep it. Do YOU trust them ?

Ho HO Bill in Casa Grande, AZ.

Re: Professionals or Very Serious Hobbyists!!

#6

I got it too!!

Dave Peebles Lyons, Ohio!

>Hi Mark,

I received that one too. But since I don't have the ability to see PP on this computer I didn't know what they were looking for.

Thanks for the info. But it is a short turn around time. I did Google the contact persons name, and it does seem legit. But the subject line did remind me of an Al Kider question. :)

Dave

Dave

Re: Professionals or Very Serious Hobbyists!!

#7

Re: Professionals or Very Serious Hobbyists!!

Peter Teubel

>Sure. As with any architectural turning(s), 50% of the agreed price is paid up front before any work starts and the balance is paid before it leaves my shop. No exceptions.

Re: Professionals or Very Serious Hobbyists!!

#8

Not to worry.

Ed Snow

>Those pieces really are not that big, Nasa just has this wierd habit of saying inches when they mean millimeters.

Now just think about how amazing it is that the ISS actually fits togeth with them coordinating it. Or did/does it?