Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Turkey Calls

Posts

Turkey Calls

#1

Turkey Calls

Kurt Aebi

>Here's my latest 2:

The first one is for me: Bocote Slate/glass with a Tulipwood striker that has a cherry handle.

[img]http://www.hunt101.com/img/395785.jpg[/img]

The second is for the local Chief of Police: Maple Slate/Glass - Double sided with a Paduk striker.

[img]http://www.hunt101.com/img/395786.jpg[/img]

The double sided has 2 distinct differentpitches to it. The Slate side has a deep raspiness to it and theh glass is a much higher pitch.

Looks like I'm addicted!

Re: Turkey Calls

#2

Re: Turkey Calls

Kurt Aebi

>Oops, here's teh pictures


img

Re: Turkey Calls

#3

Re: Turkey Calls 

Kurt Aebi

>


img

Re: Turkey Calls

#4

Re: Turkey Calls

tek-Brunswick, Ohio

>Kurt for those of us that do not hunt turkey, How do you make these make sound? How much does the type, hardness, and texture of the wood in the striker change the sound?

Tom

Re: Turkey Calls

#5

Re: Turkey Calls

Kurt Aebi

>The way the little pot is setup, it's like a speaker type setup, where there is a friction surface on the top that you scrape the end of the striker across creating sound-waves. The smaller diameter glass below the slate top surface starts to vibrate and the sound waves exit the holes in the bottom. You hold the pot sort-of cupped in one hand working the striker with the other. The cupped hand acts like a deflector directing the sound out and away from you.

You would hold the striker down on the shaft ans scrape at about a 45� angle with little circular(actually like a "J")movements to make it sound like a hen turkey yelping (calling a Male turkey [Tom or Gobbler] to say "I'm Ready for the Spring passage, so to speak)and you can by moving th striker in different patterns simulate quite a lot of the turkey's vocabulary.

Hunters use these in the spring to "entice" the Gobbler into range for harvest. Not as easy as it sounds since turkeys have periferal vision of up to 300� and have the vision of a hawk (so to speak). They are afraid of everything as well, so they are constantly looking for movement. This on top of a shotgun only having a range of 50 yards absolute maximum, make it a rather challenging proposition. Some people are better at it than others - but it is cool to hear them gobble to your calls - if nothing else!

Re: Turkey Calls

#6

Re: Turkey Calls

Rich in VA

>Kurt,

I made a few this past week, one cherry one that was just great. One bubinga that sucked, as did the yew.

Have one more stick of yew and one of Brazilian rosewood. Looks like big keys to success are having the tip flared, as you do in one pic, and having the shaft no bigger than about 5/16". Seems like the fatter they are the harder they are to work.

Good looking stuff there, keep 'em coming......................

R

Re: Turkey Calls

#7

Re: Turkey Calls

Kurt Aebi

>Rich,

I've also noticed that the flared tip really helps on the striker and i've also noticed that the fatter strikers don't work so well and a softwood for the striker just ain't no good at all! Length of the striker seems to make a big difference too.

The 2 that didn't work so well, what did you use for gluing the sounboard and friction surface. I've noticed that with some wood, you have to use a more flexible glue (Silicone, RTV) and other wood likes a more rigid glue (liquid nails, epoxy). But it has been trial and error for me, so far.

This has been as fun as making pens, bowls & Boxes!