We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Hello I just found a logger who has a pile of cherry burls and I'm wondering if anyone can tell me what they go for.I never had to buy any before,I've managed to scrounge up a supply over the last few years locally.Thank's for any advice. Pat
>I just bought a pile of them from a local logger/forester for $2.00 each and he was happy with that. These are just a problem for people who cut saw logs and they usually are happy to throw them in a pile and see that they get used.Some of the ones that I got were fist size and hardly useable and some of them were up to 14 to 16" diameter.I just buy whatever they want to sell and dont sort them.Good luck with it,they are worth whatever they are worth to you to use.
>This seems like a reasonable way to go. I was just discussing this issue last night with a friend who is a professional turner and who also deals in local burls. He was in contact with someone who wanted $2.00 per pound for Cherry burls...
There are a lot of people who want to sell burls by the pound. I would not recommend ever doing that unless the burls were small, or if the larger ones were already cut open in some way to reveal the condition of the interior. Of course, that can severely limit your creative design possabilities. While a large burl that is in good condition all the way through can be worth a lot (after you put your hard work and expert knowledge and skill into it), most larger burls have deep bark inclusions, voids, and are sometimes rotten or full of ants (or worse) on the inside. The really large burls, say those over 100 pounds and up to a ton or so, are so big and cumbersome that very few people can even deal with them, in terms of moving, sawing, coring, or even making informed decisions about cutting them up to make the best use of what's there.
You are much more likely to get a real high quality, nicely figured burl in the 10" - 16" range (thinking of Black Cherry), and even they have quite a bit of individual "personality". I've been known to give $ 25.00 for a real nice looking, fairly fresh, round and symmetrical Black Cherry burl about 14" in diameter, and up to $ 50.00 for similar burls in the 18"- 20" range. Most burls I use are free. At least smaller burls won't cost you a fortune, even if buying by the pound, while paying $2.00 per pound for an 600 pound root burl could be a BIG mistake.
>Brad-Thanks for your input.I've only met the guy on the phone,he sounds like an ok type of guy.I was thinking more along the line of 1.00 per pound for the small stuff.He says he has a 200 pounder waiting up there.Best one I've got so far came from Springfield,Vt and weighed about 50 lbs.I'll let you all know what happens. Pat
He doesn't get a lot of burls, but when he does, they get set aside for me. Also, I get the crotches and other things that won't fit on his saw. Some won't fit my truck...
He's in Andover, NJ on Route 206. Can't miss him. I have enough for now. If you're coming, send me an e-mail. I live 2 miles away.