Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

McNaughton coring post length on Oneway 2436

Posts

McNaughton coring post length on Oneway 2436

#1

McNaughton coring post length on Oneway 2436

Bud

>I have seen that there were some issues with the McNaughton standard post length being too short on some lathes and a special long length post is needed, mostly for Powermatics.

What McNaughton coring post length is needed for a Oneway 2436, the standard or long post?

Thanks much

Bud

Re: McNaughton coring post length on Oneway 2436

#2

Re: McNaughton coring post length on Oneway 2436

Bill Hale

>YOU HAVE TO HAVE THE LONG POST.

Bill

Re: McNaughton coring post length on Oneway 2436

#3

Re: McNaughton coring post length on Oneway 2436

Greg Jensen

>The Kelton Standard column provided with Mini Systems has a 1" section that is 2 3/4" long. The longer column provided with the large systems has a 1" section that is 4" long. Oneway lathes require the longer column. Most distributors have the longer column in stock and can swap it for you.

Greg Jensen