Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

any experiences with Copper Beech? *LINK*

Posts

any experiences with Copper Beech? *LINK*

#1

any experiences with Copper Beech? *LINK*

Ed Kelle

>I'b being given some Copper Beech (actually purple) by the State Parks to do some gifts for their more generous members. From their most popular tree which died and was taken down in Feb. It is still pretty green, and I have to get a few pieces done by mid next week, in order be presented during their Festival on the 22nd &23rd. Most likely I will do some vases. I'd really much rather prefer not to work green, but time is an issue here.

I plan on finishing with Watco for a natural look, though I could try our my new Beal system afterwards.

The story of this tree hit the papers in March and they had a few hundred calls about it that day. Luckily, someone saw my work and contacted me, so I am only 1 of 2 turners getting wood. Plus the the director told me I can go thru their log dump anytime, a big plus for me, expecially since I am only 5 minutes away.

If anyone has experience working with this wood, I'd sure appreciate any advice. Thanks

Here is the link to a story of the history of the tree


The Fairhaven Beech

Re: any experiences with Copper Beech? *LINK*

#2

Re: any experiences with Copper Beech?

Mac

>Yes, I have a couple small pieces that I roughed out of a copper beech tree that was taken down locally.The tree was planted on the road I travel to town about 40 years ago and grew very fast for a copper beech.They are a fabulous tree,I believe the prettiest that nature has to offer.Last fall the home was sold to someone that none of we "locals " knew.I drove by one day to see the new owner about half way through the tree with his trusty chain saw.Couldnt bear to stay around, so drove off and developed an immediate dislike for the new neighbor.I am planting copper beeches on my land as I can afford them.They are not cheap.I asked the arborist, where I get mine, if he would have been interested in the above tree, as he deals in large trees and also moves them. He said he could have easily dug that tree and sold it for $20,000 to $25,000, and it would have sold in less than a week.I stopped and asked the new fellow if he would part with a piece of the now firewood so I could turn it,he said "sure"for $10 a piece,I bought two and grinned all the way home.Someday I will tell him about his mistake,just waiting for the right time,revenge is sweet!The wood turns like regular beech,is hard when dry,but turns well wet,distorts quite a lot,so leave it a bit on the heavy side for rough outs.It looks just the same as beech when dry, cant see any difference between the two.Have a couple more stories about copper beech, but wont bore you with them now.Enjoy the wood,it came from a beautiful tree and is worthy of your best effort.Take care.......

Re: any experiences with Copper Beech? *LINK*

#3

Re: any experiences with Copper Beech?

Ed Kelle

>thanks Mac, I will have to plan for extra movement. Still haven't gotten the wood, so I am not sure what is happening now. Only have about 9 days to get anything done, so really no way to even go for the alcohol soak for anything I try

Re: any experiences with Copper Beech? *LINK*

#4

Re: any experiences with Copper Beech?

Mac

>Best bet will be to try to make it as thin as you can I guess,good luck with it.It spalts very quickly,so if you are lucky enough to get a few pieces for yourself,remember it can go from spalt to rot in less than 1 season.....spalted beech is a mainstay of UK turners,its beautiful.

Re: any experiences with Copper Beech? *LINK*

#5

Re: any experiences with Copper Beech?

RevDoug

>Ed, you might try turning green to complete, including the sanding, and then boil for at least an hour. It may very well move on you, but should not crack. You'll also have some hand sanding to do when it drys, but it won't be bad. Let me know if you need more info.

Turn 'em round,

Re: any experiences with Copper Beech? *LINK*

#6

Re: any experiences with Copper Beech?

Ed Kelle

>Thanks, I just finished the first piece, turned green and sanded. Almost uniform thickness. Doing some vases, and I was sure to leave the pith out, it was heavily aligned on one side. Some slight warpage so far but I do not expect cracking. Just put on the first coat of oil. Ideally I would have rough turned but these things are due next week. Thanks for the advice