Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Hemlock Question

Posts

Hemlock Question

#1

Hemlock Question

Gary R

>Hello all:

Is there any value in saving a few chunks of Hemlock? I have never turned any, and couldn't find any references to anyone who has. Tree was about 50', and dead. Lower 20' is fairly dry. Not dryed out, but not wet cut either. It was at a neighbors camp, and they took it down while I was there on Sunday.

Thanks for the recommendations

Re: Hemlock Question

#2

no

TDaniel

>Hemlock is very brittle and is not considered a desirable turning wood. However, I have often seen some nice vessels from wood that I did not think were good turning woods. Turning wood is like a box of chocolate....you never know what you're gonna get.

TD

Re: Hemlock Question

#3

Re: Not Quite

Mark Mandell - Gone Round In Jersey

>You know you'll get choclate. Everything else is cream. |;-}}}

Re: Hemlock Question

#4

Re: no

Gary R

>Thanks for the info - I did grab quite a few hard maple pieces. Nice straight and tall tree. It was about 12" at the base, and about 30'. Trimmers cut into nice 20" sections, so i just had to toss on the truck. Ends are already sealed, and waiting for some free time.

Re: Hemlock Question

#5

Re: Hemlock Question

RussFairfield

>Other than it being a whiter coloring, you will find Hemlock not much different from turning Douglas Fir or Larch (Tamarac). There are better species for turning and finishing, but if it is free wood, why not try it. You might find youself joining that very select group who turn bowls from these species all the time without any problems. Of course, I also think most species of Pine are fine turning woods.

By the way, the grain patterns in all of these species that I have mentioned can also make some beautiful salad bowls and platters. Large burls and scabs on these same species will have spectacular grain patterns. Sometimes that is worth having to deal with their being rather brashy, filled with pitch and resins, and being difficult to sand and finish.

Turn that Hemlock thin, and soak it in an oil finish, and you will have a piece of wood whose translucence exceeds anything that Norfolk Island Pine will ever be.

Re: Hemlock Question

#6

Re: Hemlock Question

Ed Karch

>Turned some bowls from Hemlock. Sold like crazy. Laquetta turned a goblet from hemlock and now owns "a cup of hemlock". Iknow that was a totally different plant that Socrates did himself in with but makes a good conversation piece.

Re: Hemlock Question

#7

Re: Hemlock Question

Ron McKinley

>I've turned a few pieces from Hemlock 2"x4"s and they came out very well. I laminated a few pieces and turned some shallow bowls and it looks a lot like maple. Our woodworking club had a 2"x4" contest to see who could make the most of an 8' 2"x4". I did turning and most of the members are flat workers so I didn't win a prize. It's like pine or other softwoods and doesn't take a stain well.....Ron

Re: Hemlock Question

#8

Re: Hemlock Question

RussFairfield

>Put the stain in the finish and not try to get it into the wood, and you will have better luck with it.

Re: Hemlock Question

#9

Re: Hemlock Question

Ron McKinley

>Thanks. I'll try that. I've tried using Watco and buffing it out before staining but didn't seem to work. I like the natural Watco on hemlock but would like to stain it once in a while.......Ron