We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>does anyone have plans for a steady rest..been turning some baseball bats and a steady rest would be a handy item I can see now...don't turn a lot of longer items currently other than these bats, so some plans would be appreciated or even idea's...tks in advance...Dennis
Re:What is hanging in the background of your photo
Dennis Taylor
>I won't be attending, but I surely would be happy to pay for postage!...looks like a good idea, a bat blank can get pretty whippy and that might just fix my problem...Dennis
>Re: Homemade Sanders: With the exception of the one on the left, they are all Rollerblade wheels. I modified the sanders I saw on Darrel Feltmates Website.
First, Rough the inside of the bearing with a file, so the epoxy will have something to bite on.
Epoxy 1/4 inch all-thread in the bearing, being careful to get the glue ONLY on the inside, or you'll glue the bearing, and glued bearings don't roll very well. :o(
Bend the all-thread about an inch back from the wheel, to about a 45 degree angle. (I clamped right up next to the wheel in the corner of my vise. You may want to do this before you glue it in the bearing.) Glue on a large dowel handle.
For the sanding pad, I cut a circle out of some old shower shoes (flip-flops), and epoxied it to the wheel. Then I epoxied some velcro hook to the pad. I use the 3" H&L discs from Klingspoors.
These little sanders work like charms!!! This is an old photo. I've made more, and have them all the way to 400 grit.